Represents the D-Bus property "EnabledFacilityLocks".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "EpsUeModeOperation".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
If this property is not %G_BUS_TYPE_NONE, then #GDBusProxy:g-connection must be %NULL and will be set to the #GDBusConnection obtained by calling g_bus_get() with the value of this property.
The #GDBusConnection the proxy is for.
The timeout to use if -1 (specifying default timeout) is passed
as timeout_msec in the g_dbus_proxy_call() and
g_dbus_proxy_call_sync() functions.
This allows applications to set a proxy-wide timeout for all remote method invocations on the proxy. If this property is -1, the default timeout (typically 25 seconds) is used. If set to %G_MAXINT, then no timeout is used.
Flags from the #GDBusProxyFlags enumeration.
Ensure that interactions with this proxy conform to the given interface. This is mainly to ensure that malformed data received from the other peer is ignored. The given #GDBusInterfaceInfo is said to be the "expected interface".
The checks performed are:
When completing a method call, if the type signature of the reply message isn't what's expected, the reply is discarded and the #GError is set to %G_IO_ERROR_INVALID_ARGUMENT.
Received signals that have a type signature mismatch are dropped and a warning is logged via g_warning().
Properties received via the initial GetAll() call or via the
::PropertiesChanged signal (on the
org.freedesktop.DBus.Properties
interface) or set using g_dbus_proxy_set_cached_property()
with a type signature mismatch are ignored and a warning is
logged via g_warning().
Note that these checks are never done on methods, signals and properties that are not referenced in the given #GDBusInterfaceInfo, since extending a D-Bus interface on the service-side is not considered an ABI break.
The D-Bus interface name the proxy is for.
The well-known or unique name that the proxy is for.
The unique name that owns #GDBusProxy:g-name or %NULL if no-one currently owns that name. You may connect to #GObject::notify signal to track changes to this property.
The object path the proxy is for.
Represents the D-Bus property "Imei".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "InitialEpsBearer".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "InitialEpsBearerSettings".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "Nr5gRegistrationSettings".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "OperatorCode".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "OperatorName".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "PacketServiceState".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "Pco".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "RegistrationState".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "SubscriptionState".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Creates a binding between source_property on source and target_property
on target.
Whenever the source_property is changed the target_property is
updated using the same value. For instance:
g_object_bind_property (action, "active", widget, "sensitive", 0);
Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.
If flags contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual:
if target_property on target changes then the source_property on source
will be updated as well.
The binding will automatically be removed when either the source or the
target instances are finalized. To remove the binding without affecting the
source and the target you can just call g_object_unref() on the returned
#GBinding instance.
Removing the binding by calling g_object_unref() on it must only be done if
the binding, source and target are only used from a single thread and it
is clear that both source and target outlive the binding. Especially it
is not safe to rely on this if the binding, source or target can be
finalized from different threads. Keep another reference to the binding and
use g_binding_unbind() instead to be on the safe side.
A #GObject can have multiple bindings.
the property on source to bind
the target #GObject
the property on target to bind
flags to pass to #GBinding
Creates a binding between source_property on source and target_property
on target, allowing you to set the transformation functions to be used by
the binding.
This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.
the property on source to bind
the target #GObject
the property on target to bind
flags to pass to #GBinding
a #GClosure wrapping the transformation function from the source to the target, or %NULL to use the default
a #GClosure wrapping the transformation function from the target to the source, or %NULL to use the default
Asynchronously invokes the method_name method on proxy.
If method_name contains any dots, then name is split into interface and
method name parts. This allows using proxy for invoking methods on
other interfaces.
If the #GDBusConnection associated with proxy is closed then
the operation will fail with %G_IO_ERROR_CLOSED. If
cancellable is canceled, the operation will fail with
%G_IO_ERROR_CANCELLED. If parameters contains a value not
compatible with the D-Bus protocol, the operation fails with
%G_IO_ERROR_INVALID_ARGUMENT.
If the parameters #GVariant is floating, it is consumed. This allows
convenient 'inline' use of g_variant_new(), e.g.:
g_dbus_proxy_call (proxy,
"TwoStrings",
g_variant_new ("(ss)",
"Thing One",
"Thing Two"),
G_DBUS_CALL_FLAGS_NONE,
-1,
NULL,
(GAsyncReadyCallback) two_strings_done,
&data);
If proxy has an expected interface (see
#GDBusProxy:g-interface-info) and method_name is referenced by it,
then the return value is checked against the return type.
This is an asynchronous method. When the operation is finished,
callback will be invoked in the
[thread-default main context][g-main-context-push-thread-default]
of the thread you are calling this method from.
You can then call g_dbus_proxy_call_finish() to get the result of
the operation. See g_dbus_proxy_call_sync() for the synchronous
version of this method.
If callback is %NULL then the D-Bus method call message will be sent with
the %G_DBUS_MESSAGE_FLAGS_NO_REPLY_EXPECTED flag set.
Name of method to invoke.
A #GVariant tuple with parameters for the signal or %NULL if not passing parameters.
Flags from the #GDBusCallFlags enumeration.
The timeout in milliseconds (with %G_MAXINT meaning "infinite") or -1 to use the proxy default timeout.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL if you don't care about the result of the method invocation.
Asynchronously invokes the DisableFacilityLock() D-Bus method on proxy.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_modem3gpp_call_disable_facility_lock_finish() to get the result of the operation.
See mm_gdbus_modem3gpp_call_disable_facility_lock_sync() for the synchronous, blocking version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_gdbus_modem3gpp_call_disable_facility_lock().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_gdbus_modem3gpp_call_disable_facility_lock().
Synchronously invokes the DisableFacilityLock() D-Bus method on proxy. The calling thread is blocked until a reply is received.
See mm_gdbus_modem3gpp_call_disable_facility_lock() for the asynchronous version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
Finishes an operation started with g_dbus_proxy_call().
A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_proxy_call().
Asynchronously invokes the Register() D-Bus method on proxy.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_modem3gpp_call_register_finish() to get the result of the operation.
See mm_gdbus_modem3gpp_call_register_sync() for the synchronous, blocking version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_gdbus_modem3gpp_call_register().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_gdbus_modem3gpp_call_register().
Synchronously invokes the Register() D-Bus method on proxy. The calling thread is blocked until a reply is received.
See mm_gdbus_modem3gpp_call_register() for the asynchronous version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
Asynchronously invokes the Scan() D-Bus method on proxy.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_modem3gpp_call_scan_finish() to get the result of the operation.
See mm_gdbus_modem3gpp_call_scan_sync() for the synchronous, blocking version of this method.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_gdbus_modem3gpp_call_scan().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_gdbus_modem3gpp_call_scan().
Synchronously invokes the Scan() D-Bus method on proxy. The calling thread is blocked until a reply is received.
See mm_gdbus_modem3gpp_call_scan() for the asynchronous version of this method.
A #GCancellable or %NULL.
Asynchronously invokes the SetEpsUeModeOperation() D-Bus method on proxy.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_modem3gpp_call_set_eps_ue_mode_operation_finish() to get the result of the operation.
See mm_gdbus_modem3gpp_call_set_eps_ue_mode_operation_sync() for the synchronous, blocking version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_gdbus_modem3gpp_call_set_eps_ue_mode_operation().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_gdbus_modem3gpp_call_set_eps_ue_mode_operation().
Synchronously invokes the SetEpsUeModeOperation() D-Bus method on proxy. The calling thread is blocked until a reply is received.
See mm_gdbus_modem3gpp_call_set_eps_ue_mode_operation() for the asynchronous version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
Asynchronously invokes the SetInitialEpsBearerSettings() D-Bus method on proxy.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_modem3gpp_call_set_initial_eps_bearer_settings_finish() to get the result of the operation.
See mm_gdbus_modem3gpp_call_set_initial_eps_bearer_settings_sync() for the synchronous, blocking version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_gdbus_modem3gpp_call_set_initial_eps_bearer_settings().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_gdbus_modem3gpp_call_set_initial_eps_bearer_settings().
Synchronously invokes the SetInitialEpsBearerSettings() D-Bus method on proxy. The calling thread is blocked until a reply is received.
See mm_gdbus_modem3gpp_call_set_initial_eps_bearer_settings() for the asynchronous version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
Asynchronously invokes the SetNr5gRegistrationSettings() D-Bus method on proxy.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_modem3gpp_call_set_nr5g_registration_settings_finish() to get the result of the operation.
See mm_gdbus_modem3gpp_call_set_nr5g_registration_settings_sync() for the synchronous, blocking version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_gdbus_modem3gpp_call_set_nr5g_registration_settings().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_gdbus_modem3gpp_call_set_nr5g_registration_settings().
Synchronously invokes the SetNr5gRegistrationSettings() D-Bus method on proxy. The calling thread is blocked until a reply is received.
See mm_gdbus_modem3gpp_call_set_nr5g_registration_settings() for the asynchronous version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
Asynchronously invokes the SetPacketServiceState() D-Bus method on proxy.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_modem3gpp_call_set_packet_service_state_finish() to get the result of the operation.
See mm_gdbus_modem3gpp_call_set_packet_service_state_sync() for the synchronous, blocking version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_gdbus_modem3gpp_call_set_packet_service_state().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_gdbus_modem3gpp_call_set_packet_service_state().
Synchronously invokes the SetPacketServiceState() D-Bus method on proxy. The calling thread is blocked until a reply is received.
See mm_gdbus_modem3gpp_call_set_packet_service_state() for the asynchronous version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
Synchronously invokes the method_name method on proxy.
If method_name contains any dots, then name is split into interface and
method name parts. This allows using proxy for invoking methods on
other interfaces.
If the #GDBusConnection associated with proxy is disconnected then
the operation will fail with %G_IO_ERROR_CLOSED. If
cancellable is canceled, the operation will fail with
%G_IO_ERROR_CANCELLED. If parameters contains a value not
compatible with the D-Bus protocol, the operation fails with
%G_IO_ERROR_INVALID_ARGUMENT.
If the parameters #GVariant is floating, it is consumed. This allows
convenient 'inline' use of g_variant_new(), e.g.:
g_dbus_proxy_call_sync (proxy,
"TwoStrings",
g_variant_new ("(ss)",
"Thing One",
"Thing Two"),
G_DBUS_CALL_FLAGS_NONE,
-1,
NULL,
&error);
The calling thread is blocked until a reply is received. See g_dbus_proxy_call() for the asynchronous version of this method.
If proxy has an expected interface (see
#GDBusProxy:g-interface-info) and method_name is referenced by it,
then the return value is checked against the return type.
Name of method to invoke.
A #GVariant tuple with parameters for the signal or %NULL if not passing parameters.
Flags from the #GDBusCallFlags enumeration.
The timeout in milliseconds (with %G_MAXINT meaning "infinite") or -1 to use the proxy default timeout.
A #GCancellable or %NULL.
Like g_dbus_proxy_call() but also takes a #GUnixFDList object.
This method is only available on UNIX.
Name of method to invoke.
A #GVariant tuple with parameters for the signal or %NULL if not passing parameters.
Flags from the #GDBusCallFlags enumeration.
The timeout in milliseconds (with %G_MAXINT meaning "infinite") or -1 to use the proxy default timeout.
A #GUnixFDList or %NULL.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL if you don't care about the result of the method invocation.
Finishes an operation started with g_dbus_proxy_call_with_unix_fd_list().
A #GAsyncResult obtained from the #GAsyncReadyCallback passed to g_dbus_proxy_call_with_unix_fd_list().
Like g_dbus_proxy_call_sync() but also takes and returns #GUnixFDList objects.
This method is only available on UNIX.
Name of method to invoke.
A #GVariant tuple with parameters for the signal or %NULL if not passing parameters.
Flags from the #GDBusCallFlags enumeration.
The timeout in milliseconds (with %G_MAXINT meaning "infinite") or -1 to use the proxy default timeout.
A #GUnixFDList or %NULL.
A #GCancellable or %NULL.
Helper function used in service implementations to finish handling invocations of the DisableFacilityLock() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation, you cannot use it afterwards.
A #GDBusMethodInvocation.
Helper function used in service implementations to finish handling invocations of the Register() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation, you cannot use it afterwards.
A #GDBusMethodInvocation.
Helper function used in service implementations to finish handling invocations of the Scan() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation, you cannot use it afterwards.
A #GDBusMethodInvocation.
Parameter to return.
Helper function used in service implementations to finish handling invocations of the SetEpsUeModeOperation() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation, you cannot use it afterwards.
A #GDBusMethodInvocation.
Helper function used in service implementations to finish handling invocations of the SetInitialEpsBearerSettings() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation, you cannot use it afterwards.
A #GDBusMethodInvocation.
Helper function used in service implementations to finish handling invocations of the SetNr5gRegistrationSettings() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation, you cannot use it afterwards.
A #GDBusMethodInvocation.
Helper function used in service implementations to finish handling invocations of the SetPacketServiceState() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation, you cannot use it afterwards.
A #GDBusMethodInvocation.
Asynchronously disables the modem personalization lock.
When the operation is finished, callback will be invoked in the
Single bit value describing the modem personalization lock to disable.
String with control key required to unlock the personalization.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_modem_3gpp_disable_facility_lock().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_modem_3gpp_disable_facility_lock().
Synchronously disables facility lock.
The calling thread is blocked until a reply is received. See mm_modem_3gpp_disable_facility_lock() for the asynchronous version of this method.
Single bit value describing the modem personalization lock to disable.
String with control key required to unlock the personalization.
A #GCancellable or %NULL.
Gets a copy of the
Gets a copy of the DBus path of the initial EPS #MMBearer exposed in this #MMModem3gpp.
Gets a copy of the code of the operator to which the mobile is currently registered.
Returned in the format
Gets a copy of the name of the operator to which the mobile is currently registered.
Gets a copy of the DBus path of the #MMObject object which implements this interface.
This function is intended for #GObject implementations to re-enforce a [floating][floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink().
Increases the freeze count on object. If the freeze count is
non-zero, the emission of "notify" signals on object is
stopped. The signals are queued until the freeze count is decreased
to zero. Duplicate notifications are squashed so that at most one
#GObject::notify signal is emitted for each property modified while the
object is frozen.
This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Looks up the value for a property from the cache. This call does no blocking IO.
If proxy has an expected interface (see
#GDBusProxy:g-interface-info) and property_name is referenced by
it, then value is checked against the type of the property.
Property name.
Gets the names of all cached properties on proxy.
Gets the connection proxy is for.
Gets a named field from the objects table of associations (see g_object_set_data()).
name of the key for that association
Gets the timeout to use if -1 (specifying default timeout) is
passed as timeout_msec in the g_dbus_proxy_call() and
g_dbus_proxy_call_sync() functions.
See the #GDBusProxy:g-default-timeout property for more details.
Get the list of facilities for which PIN locking is enabled.
Get the UE mode of operation for EPS.
Gets the flags that proxy was constructed with.
Gets the
self was constructed. Use mm_modem_3gpp_dup_imei() if on another
thread.
Gets D-Bus introspection information for the D-Bus interface
implemented by interface_.
Asynchronously gets the initial EPS #MMBearer object exposed by this #MMModem3gpp.
When the operation is finished, callback will be invoked in the
See mm_modem_3gpp_get_initial_eps_bearer_sync() for the synchronous, blocking version of this method.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_modem_3gpp_get_initial_eps_bearer().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_modem_3gpp_get_initial_eps_bearer().
Gets a #MMBearerProperties object specifying the settings configured in the device to use when attaching to the LTE network.
self are not updated when the values in the
interface change. Instead, the client is expected to call
mm_modem_3gpp_get_initial_eps_bearer_settings() again to get a new
#MMBearerProperties with the new values.
Synchronously gets the initial EPS #MMBearer object exposed by this #MMModem3gpp.
The calling thread is blocked until a reply is received. See mm_modem_3gpp_get_initial_eps_bearer() for the asynchronous version of this method.
A #GCancellable or %NULL.
Returns the #GDBusInterfaceInfo, if any, specifying the interface
that proxy conforms to. See the #GDBusProxy:g-interface-info
property for more details.
Gets the D-Bus interface name proxy is for.
Gets the name that proxy was constructed for.
When connected to a message bus, this will usually be non-%NULL. However, it may be %NULL for a proxy that communicates using a peer-to-peer pattern.
The unique name that owns the name that proxy is for or %NULL if
no-one currently owns that name. You may connect to the
#GObject::notify signal to track changes to the
#GDBusProxy:g-name-owner property.
Gets a #MMNr5gRegistrationSettings object including the configured 5GNR registration settings.
self are not updated when the values in the
interface change. Instead, the client is expected to call
mm_modem_3gpp_get_nr5g_registration_settings() again to get a new
#MMNr5gRegistrationSettings with the new values.
Gets the #GDBusObject that interface_ belongs to, if any.
Gets the object path proxy is for.
Gets the code of the operator to which the mobile is currently registered.
Returned in the format
If the
self was constructed. Use mm_modem_3gpp_dup_operator_code() if on another
thread.
Gets the name of the operator to which the mobile is currently registered.
self was constructed. Use mm_modem_3gpp_dup_operator_name() if on another
thread.
Get the packet domain service state.
Gets the DBus path of the #MMObject which implements this interface.
Get the list of #MMPco received from the network.
Gets a property of an object.
The value can be:
In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().
Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.
the name of the property to get
return location for the property value
This function gets back user data pointers stored via g_object_set_qdata().
A #GQuark, naming the user data pointer
Get the the mobile registration status as defined in 3GPP TS 27.007 section 10.1.19.
Get the current subscription status of the account. This value is only available after the modem attempts to register with the network.
The value of this property can only be obtained with operator specific logic (e.g. processing specific PCO info), and therefore it doesn't make sense to expose it in the ModemManager interface.
Gets n_properties properties for an object.
Obtained properties will be set to values. All properties must be valid.
Warnings will be emitted and undefined behaviour may result if invalid
properties are passed in.
the names of each property to get
the values of each property to get
Initializes the object implementing the interface.
This method is intended for language bindings. If writing in C, g_initable_new() should typically be used instead.
The object must be initialized before any real use after initial construction, either with this function or g_async_initable_init_async().
Implementations may also support cancellation. If cancellable is not %NULL,
then initialization can be cancelled by triggering the cancellable object
from another thread. If the operation was cancelled, the error
%G_IO_ERROR_CANCELLED will be returned. If cancellable is not %NULL and
the object doesn't support cancellable initialization the error
%G_IO_ERROR_NOT_SUPPORTED will be returned.
If the object is not initialized, or initialization returns with an error, then all operations on the object except g_object_ref() and g_object_unref() are considered to be invalid, and have undefined behaviour. See the [introduction][ginitable] for more details.
Callers should not assume that a class which implements #GInitable can be initialized multiple times, unless the class explicitly documents itself as supporting this. Generally, a class’ implementation of init() can assume (and assert) that it will only be called once. Previously, this documentation recommended all #GInitable implementations should be idempotent; that recommendation was relaxed in GLib 2.54.
If a class explicitly supports being initialized multiple times, it is recommended that the method is idempotent: multiple calls with the same arguments should return the same results. Only the first call initializes the object; further calls return the result of the first call.
One reason why a class might need to support idempotent initialization is if it is designed to be used via the singleton pattern, with a #GObjectClass.constructor that sometimes returns an existing instance. In this pattern, a caller would expect to be able to call g_initable_init() on the result of g_object_new(), regardless of whether it is in fact a new instance.
optional #GCancellable object, %NULL to ignore.
Starts asynchronous initialization of the object implementing the interface. This must be done before any real use of the object after initial construction. If the object also implements #GInitable you can optionally call g_initable_init() instead.
This method is intended for language bindings. If writing in C, g_async_initable_new_async() should typically be used instead.
When the initialization is finished, callback will be called. You can
then call g_async_initable_init_finish() to get the result of the
initialization.
Implementations may also support cancellation. If cancellable is not
%NULL, then initialization can be cancelled by triggering the cancellable
object from another thread. If the operation was cancelled, the error
%G_IO_ERROR_CANCELLED will be returned. If cancellable is not %NULL, and
the object doesn't support cancellable initialization, the error
%G_IO_ERROR_NOT_SUPPORTED will be returned.
As with #GInitable, if the object is not initialized, or initialization returns with an error, then all operations on the object except g_object_ref() and g_object_unref() are considered to be invalid, and have undefined behaviour. They will often fail with g_critical() or g_warning(), but this must not be relied on.
Callers should not assume that a class which implements #GAsyncInitable can be initialized multiple times; for more information, see g_initable_init(). If a class explicitly supports being initialized multiple times, implementation requires yielding all subsequent calls to init_async() on the results of the first call.
For classes that also support the #GInitable interface, the default implementation of this method will run the g_initable_init() function in a thread, so if you want to support asynchronous initialization via threads, just implement the #GAsyncInitable interface without overriding any interface methods.
the [I/O priority][io-priority] of the operation
optional #GCancellable object, %NULL to ignore.
a #GAsyncReadyCallback to call when the request is satisfied
Finishes asynchronous initialization and returns the result. See g_async_initable_init_async().
a #GAsyncResult.
Checks whether object has a [floating][floating-ref] reference.
Finishes the async construction for the various g_async_initable_new calls, returning the created object or %NULL on error.
the #GAsyncResult from the callback
Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.
the name of a property installed on the class of object.
Emits a "notify" signal for the property specified by pspec on object.
This function omits the property name lookup, hence it is faster than g_object_notify().
One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:
enum
{
PROP_0,
PROP_FOO,
PROP_LAST
};
static GParamSpec *properties[PROP_LAST];
static void
my_object_class_init (MyObjectClass *klass)
{
properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
0, 100,
50,
G_PARAM_READWRITE);
g_object_class_install_property (gobject_class,
PROP_FOO,
properties[PROP_FOO]);
}
and then notify a change on the "foo" property with:
g_object_notify_by_pspec (self, properties[PROP_FOO]);
the #GParamSpec of a property installed on the class of object.
Gets a #MMBearerProperties object specifying the settings configured in the device to use when attaching to the LTE network.
self was constructed. Use mm_modem_3gpp_get_initial_eps_bearer_settings()
if on another thread.
Gets a #MMNr5gRegistrationSettings object including the configured 5GNR registration settings.
self was constructed. Use mm_modem_3gpp_get_nr5g_registration_settings()
if on another thread.
Increase the reference count of object, and possibly remove the
[floating][floating-ref] reference, if object has a floating reference.
In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.
Since GLib 2.56, the type of object will be propagated to the return type
under the same conditions as for g_object_ref().
Asynchronously requests registration with a given mobile network.
When the operation is finished, callback will be invoked in the
See mm_modem_3gpp_register_sync() for the synchronous, blocking version of this method.
The operator ID to register. An empty string can be used to register to the home network.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_modem_3gpp_register().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_modem_3gpp_register().
Synchronously requests registration with a given mobile network.
The calling thread is blocked until a reply is received. See mm_modem_3gpp_register() for the asynchronous version of this method.
The operator ID to register. An empty string can be used to register to the home network.
A #GCancellable or %NULL.
Releases all references to other objects. This can be used to break reference cycles.
This function should only be called from object system implementations.
Asynchronously requests to scan available 3GPP networks.
When the operation is finished, callback will be invoked in the
See mm_modem_3gpp_scan_sync() for the synchronous, blocking version of this method.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_modem_3gpp_scan().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_modem_3gpp_scan().
Synchronously requests to scan available 3GPP networks.
The calling thread is blocked until a reply is received. See mm_modem_3gpp_scan() for the asynchronous version of this method.
A #GCancellable or %NULL.
If value is not %NULL, sets the cached value for the property with
name property_name to the value in value.
If value is %NULL, then the cached value is removed from the
property cache.
If proxy has an expected interface (see
#GDBusProxy:g-interface-info) and property_name is referenced by
it, then value is checked against the type of the property.
If the value #GVariant is floating, it is consumed. This allows
convenient 'inline' use of g_variant_new(), e.g.
g_dbus_proxy_set_cached_property (proxy,
"SomeProperty",
g_variant_new ("(si)",
"A String",
42));
Normally you will not need to use this method since proxy
is tracking changes using the
org.freedesktop.DBus.Properties.PropertiesChanged
D-Bus signal. However, for performance reasons an object may
decide to not use this signal for some properties and instead
use a proprietary out-of-band mechanism to transmit changes.
As a concrete example, consider an object with a property
ChatroomParticipants which is an array of strings. Instead of
transmitting the same (long) array every time the property changes,
it is more efficient to only transmit the delta using e.g. signals
ChatroomParticipantJoined(String name) and
ChatroomParticipantParted(String name).
Property name.
Value for the property or %NULL to remove it from the cache.
Each object carries around a table of associations from strings to pointers. This function lets you set an association.
If the object already had an association with that name, the old association will be destroyed.
Internally, the key is converted to a #GQuark using g_quark_from_string().
This means a copy of key is kept permanently (even after object has been
finalized) — so it is recommended to only use a small, bounded set of values
for key in your program, to avoid the #GQuark storage growing unbounded.
name of the key
data to associate with that key
Sets the timeout to use if -1 (specifying default timeout) is
passed as timeout_msec in the g_dbus_proxy_call() and
g_dbus_proxy_call_sync() functions.
See the #GDBusProxy:g-default-timeout property for more details.
Timeout in milliseconds.
Asynchronously requests to update the EPS UE mode of operation.
When the operation is finished, callback will be invoked in the
See mm_modem_3gpp_set_eps_ue_mode_operation_sync() for the synchronous, blocking version of this method. The calling thread is blocked until a reply is received.
A #MMModem3gppEpsUeModeOperation.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_modem_3gpp_set_eps_ue_mode_operation().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_modem_3gpp_set_eps_ue_mode_operation().
Synchronously requests to update the EPS UE mode of operation.
The calling thread is blocked until a reply is received. See mm_modem_3gpp_set_eps_ue_mode_operation() for the asynchronous version of this method.
A #MMModem3gppEpsUeModeOperation.
A #GCancellable or %NULL.
Asynchronously configures the settings for the initial LTE default bearer.
When the operation is finished, callback will be invoked in the
A #MMBearerProperties object with the properties to use.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_modem_3gpp_set_initial_eps_bearer_settings().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_modem_3gpp_set_initial_eps_bearer_settings().
Synchronously configures the settings for the initial LTE default bearer.
The calling thread is blocked until a reply is received. See mm_modem_3gpp_set_initial_eps_bearer_settings() for the asynchronous version of this method.
A #MMBearerProperties object with the properties to use.
A #GCancellable or %NULL.
Ensure that interactions with proxy conform to the given
interface. See the #GDBusProxy:g-interface-info property for more
details.
Minimum interface this proxy conforms to or %NULL to unset.
Asynchronously configures the 5GNR registration settings.
When the operation is finished, callback will be invoked in the
See mm_modem_3gpp_set_nr5g_registration_settings_sync() for the synchronous, blocking version of this method.
A #MMNr5gRegistrationSettings.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_modem_3gpp_set_nr5g_registration_settings().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_modem_3gpp_set_nr5g_registration_settings().
Synchronously configures the 5GNR registration settings.
The calling thread is blocked until a reply is received. See mm_modem_3gpp_set_nr5g_registration_settings() for the asynchronous version of this method.
A #MMNr5gRegistrationSettings.
A #GCancellable or %NULL.
Sets the #GDBusObject for interface_ to object.
Note that interface_ will hold a weak reference to object.
A #GDBusObject or %NULL.
Asynchronously tries to attach or detach from the packet domain service.
When the operation is finished, callback will be invoked in the
See mm_modem_3gpp_set_packet_service_state_sync() for the synchronous, blocking version of this method.
A #MMModem3gppPacketServiceState.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_modem_3gpp_set_packet_service_state().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_modem_3gpp_set_packet_service_state().
Synchronously tries to attach or detach from the packet domain service.
The calling thread is blocked until a reply is received. See mm_modem_3gpp_set_packet_service_state() for the asynchronous version of this method.
A #MMModem3gppPacketServiceState.
A #GCancellable or %NULL.
Sets a property on an object.
the name of the property to set
the value
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
name of the key
This function gets back user data pointers stored via
g_object_set_qdata() and removes the data from object
without invoking its destroy() function (if any was
set).
Usually, calling this function is only required to update
user data pointers with a destroy notifier, for example:
void
object_add_to_user_list (GObject *object,
const gchar *new_string)
{
// the quark, naming the object data
GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
// retrieve the old string list
GList *list = g_object_steal_qdata (object, quark_string_list);
// prepend new string
list = g_list_prepend (list, g_strdup (new_string));
// this changed 'list', so we need to set it again
g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
GList *node, *list = data;
for (node = list; node; node = node->next)
g_free (node->data);
g_list_free (list);
}
Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().
A #GQuark, naming the user data pointer
Reverts the effect of a previous call to
g_object_freeze_notify(). The freeze count is decreased on object
and when it reaches zero, queued "notify" signals are emitted.
Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.
It is an error to call this function when the freeze count is zero.
Decreases the reference count of object. When its reference count
drops to 0, the object is finalized (i.e. its memory is freed).
If the pointer to the #GObject may be reused in future (for example, if it is an instance variable of another object), it is recommended to clear the pointer to %NULL rather than retain a dangling pointer to a potentially invalid #GObject instance. Use g_clear_object() for this.
This function essentially limits the life time of the closure to
the life time of the object. That is, when the object is finalized,
the closure is invalidated by calling g_closure_invalidate() on
it, in order to prevent invocations of the closure with a finalized
(nonexisting) object. Also, g_object_ref() and g_object_unref() are
added as marshal guards to the closure, to ensure that an extra
reference count is held on object during invocation of the
closure. Usually, this function will be called on closures that
use this object as closure data.
#GClosure to watch
Find the #GParamSpec with the given name for an
interface. Generally, the interface vtable passed in as g_iface
will be the default vtable from g_type_default_interface_ref(), or,
if you know the interface has already been loaded,
g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
name of a property to look up.
Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created #GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.
This function is meant to be called from the interface's default
vtable initialization function (the class_init member of
#GTypeInfo.) It must not be called after after class_init has
been called for any object types implementing this interface.
If pspec is a floating reference, it will be consumed.
any interface vtable for the interface, or the default vtable for the interface.
the #GParamSpec for the new property
Lists the properties of an interface.Generally, the interface
vtable passed in as g_iface will be the default vtable from
g_type_default_interface_ref(), or, if you know the interface has
already been loaded, g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
Asynchronously creates a proxy for the D-Bus interface org.freedesktop.ModemManager1.Modem.Modem3gpp. See g_dbus_proxy_new() for more details.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_modem3gpp_proxy_new_finish() to get the result of the operation.
See mm_gdbus_modem3gpp_proxy_new_sync() for the synchronous, blocking version of this constructor.
Finishes an operation started with mm_gdbus_modem3gpp_proxy_new().
Like mm_gdbus_modem3gpp_proxy_new() but takes a #GBusType instead of a #GDBusConnection.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_modem3gpp_proxy_new_for_bus_finish() to get the result of the operation.
See mm_gdbus_modem3gpp_proxy_new_for_bus_sync() for the synchronous, blocking version of this constructor.
Finishes an operation started with mm_gdbus_modem3gpp_proxy_new_for_bus().
Like mm_gdbus_modem3gpp_proxy_new_sync() but takes a #GBusType instead of a #GDBusConnection.
The calling thread is blocked until a reply is received.
See mm_gdbus_modem3gpp_proxy_new_for_bus() for the asynchronous version of this constructor.
Synchronously creates a proxy for the D-Bus interface org.freedesktop.ModemManager1.Modem.Modem3gpp. See g_dbus_proxy_new_sync() for more details.
The calling thread is blocked until a reply is received.
See mm_gdbus_modem3gpp_proxy_new() for the asynchronous version of this constructor.
Creates a new instance of a #GObject subtype and sets its properties.
Construction parameters (see %G_PARAM_CONSTRUCT, %G_PARAM_CONSTRUCT_ONLY) which are not explicitly specified are set to their default values.
the type id of the #GObject subtype to instantiate
an array of #GParameter
The #MMModem3gpp structure contains private data and should only be accessed using the provided API.