Creates a skeleton object for the D-Bus interface org.freedesktop.ModemManager1.Modem.Voice.
Represents the D-Bus property "Calls".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Represents the D-Bus property "EmergencyOnly".
Since the D-Bus property for this #GObject property is readable but not writable, it is meaningful to read from it on both the client- and service-side. It is only meaningful, however, to write to it on the service-side.
Flags from the #GDBusInterfaceSkeletonFlags enumeration.
Creates a binding between source_property
on source
and target_property
on target
.
Whenever the source_property
is changed the target_property
is
updated using the same value. For instance:
g_object_bind_property (action, "active", widget, "sensitive", 0);
Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.
If flags
contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual:
if target_property
on target
changes then the source_property
on source
will be updated as well.
The binding will automatically be removed when either the source
or the
target
instances are finalized. To remove the binding without affecting the
source
and the target
you can just call g_object_unref() on the returned
#GBinding instance.
Removing the binding by calling g_object_unref() on it must only be done if
the binding, source
and target
are only used from a single thread and it
is clear that both source
and target
outlive the binding. Especially it
is not safe to rely on this if the binding, source
or target
can be
finalized from different threads. Keep another reference to the binding and
use g_binding_unbind() instead to be on the safe side.
A #GObject can have multiple bindings.
the property on source
to bind
the target #GObject
the property on target
to bind
flags to pass to #GBinding
Creates a binding between source_property
on source
and target_property
on target,
allowing you to set the transformation functions to be used by
the binding.
This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.
the property on source
to bind
the target #GObject
the property on target
to bind
flags to pass to #GBinding
a #GClosure wrapping the transformation function from the source
to the target,
or %NULL to use the default
a #GClosure wrapping the transformation function from the target
to the source,
or %NULL to use the default
Asynchronously invokes the CallWaitingQuery() D-Bus method on proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_modem_voice_call_call_waiting_query_finish() to get the result of the operation.
See mm_gdbus_modem_voice_call_call_waiting_query_sync() for the synchronous, blocking version of this method.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_gdbus_modem_voice_call_call_waiting_query().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_gdbus_modem_voice_call_call_waiting_query().
Synchronously invokes the CallWaitingQuery() D-Bus method on proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_modem_voice_call_call_waiting_query() for the asynchronous version of this method.
A #GCancellable or %NULL.
Asynchronously invokes the CallWaitingSetup() D-Bus method on proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_modem_voice_call_call_waiting_setup_finish() to get the result of the operation.
See mm_gdbus_modem_voice_call_call_waiting_setup_sync() for the synchronous, blocking version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_gdbus_modem_voice_call_call_waiting_setup().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_gdbus_modem_voice_call_call_waiting_setup().
Synchronously invokes the CallWaitingSetup() D-Bus method on proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_modem_voice_call_call_waiting_setup() for the asynchronous version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
Asynchronously invokes the CreateCall() D-Bus method on proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_modem_voice_call_create_call_finish() to get the result of the operation.
See mm_gdbus_modem_voice_call_create_call_sync() for the synchronous, blocking version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_gdbus_modem_voice_call_create_call().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_gdbus_modem_voice_call_create_call().
Synchronously invokes the CreateCall() D-Bus method on proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_modem_voice_call_create_call() for the asynchronous version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
Asynchronously invokes the DeleteCall() D-Bus method on proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_modem_voice_call_delete_call_finish() to get the result of the operation.
See mm_gdbus_modem_voice_call_delete_call_sync() for the synchronous, blocking version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_gdbus_modem_voice_call_delete_call().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_gdbus_modem_voice_call_delete_call().
Synchronously invokes the DeleteCall() D-Bus method on proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_modem_voice_call_delete_call() for the asynchronous version of this method.
Argument to pass with the method invocation.
A #GCancellable or %NULL.
Asynchronously invokes the HangupAll() D-Bus method on proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_modem_voice_call_hangup_all_finish() to get the result of the operation.
See mm_gdbus_modem_voice_call_hangup_all_sync() for the synchronous, blocking version of this method.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_gdbus_modem_voice_call_hangup_all().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_gdbus_modem_voice_call_hangup_all().
Synchronously invokes the HangupAll() D-Bus method on proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_modem_voice_call_hangup_all() for the asynchronous version of this method.
A #GCancellable or %NULL.
Asynchronously invokes the HangupAndAccept() D-Bus method on proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_modem_voice_call_hangup_and_accept_finish() to get the result of the operation.
See mm_gdbus_modem_voice_call_hangup_and_accept_sync() for the synchronous, blocking version of this method.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_gdbus_modem_voice_call_hangup_and_accept().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_gdbus_modem_voice_call_hangup_and_accept().
Synchronously invokes the HangupAndAccept() D-Bus method on proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_modem_voice_call_hangup_and_accept() for the asynchronous version of this method.
A #GCancellable or %NULL.
Asynchronously invokes the HoldAndAccept() D-Bus method on proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_modem_voice_call_hold_and_accept_finish() to get the result of the operation.
See mm_gdbus_modem_voice_call_hold_and_accept_sync() for the synchronous, blocking version of this method.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_gdbus_modem_voice_call_hold_and_accept().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_gdbus_modem_voice_call_hold_and_accept().
Synchronously invokes the HoldAndAccept() D-Bus method on proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_modem_voice_call_hold_and_accept() for the asynchronous version of this method.
A #GCancellable or %NULL.
Asynchronously invokes the ListCalls() D-Bus method on proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_modem_voice_call_list_calls_finish() to get the result of the operation.
See mm_gdbus_modem_voice_call_list_calls_sync() for the synchronous, blocking version of this method.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_gdbus_modem_voice_call_list_calls().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_gdbus_modem_voice_call_list_calls().
Synchronously invokes the ListCalls() D-Bus method on proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_modem_voice_call_list_calls() for the asynchronous version of this method.
A #GCancellable or %NULL.
Asynchronously invokes the Transfer() D-Bus method on proxy
.
When the operation is finished, callback
will be invoked in the thread-default main loop of the thread you are calling this method from (see g_main_context_push_thread_default()).
You can then call mm_gdbus_modem_voice_call_transfer_finish() to get the result of the operation.
See mm_gdbus_modem_voice_call_transfer_sync() for the synchronous, blocking version of this method.
A #GCancellable or %NULL.
A #GAsyncReadyCallback to call when the request is satisfied or %NULL.
Finishes an operation started with mm_gdbus_modem_voice_call_transfer().
The #GAsyncResult obtained from the #GAsyncReadyCallback passed to mm_gdbus_modem_voice_call_transfer().
Synchronously invokes the Transfer() D-Bus method on proxy
. The calling thread is blocked until a reply is received.
See mm_gdbus_modem_voice_call_transfer() for the asynchronous version of this method.
A #GCancellable or %NULL.
Helper function used in service implementations to finish handling invocations of the CallWaitingQuery() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation,
you cannot use it afterwards.
A #GDBusMethodInvocation.
Parameter to return.
Helper function used in service implementations to finish handling invocations of the CallWaitingSetup() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation,
you cannot use it afterwards.
A #GDBusMethodInvocation.
Helper function used in service implementations to finish handling invocations of the CreateCall() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation,
you cannot use it afterwards.
A #GDBusMethodInvocation.
Parameter to return.
Helper function used in service implementations to finish handling invocations of the DeleteCall() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation,
you cannot use it afterwards.
A #GDBusMethodInvocation.
Helper function used in service implementations to finish handling invocations of the HangupAll() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation,
you cannot use it afterwards.
A #GDBusMethodInvocation.
Helper function used in service implementations to finish handling invocations of the HangupAndAccept() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation,
you cannot use it afterwards.
A #GDBusMethodInvocation.
Helper function used in service implementations to finish handling invocations of the HoldAndAccept() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation,
you cannot use it afterwards.
A #GDBusMethodInvocation.
Helper function used in service implementations to finish handling invocations of the ListCalls() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation,
you cannot use it afterwards.
A #GDBusMethodInvocation.
Parameter to return.
Helper function used in service implementations to finish handling invocations of the Transfer() D-Bus method. If you instead want to finish handling an invocation by returning an error, use g_dbus_method_invocation_return_error() or similar.
This method will free invocation,
you cannot use it afterwards.
A #GDBusMethodInvocation.
Emits the "CallAdded" D-Bus signal.
Argument to pass with the signal.
Emits the "CallDeleted" D-Bus signal.
Argument to pass with the signal.
Exports interface_
at object_path
on connection
.
This can be called multiple times to export the same interface_
onto multiple connections however the object_path
provided must be
the same for all connections.
Use g_dbus_interface_skeleton_unexport() to unexport the object.
A #GDBusConnection to export interface_
on.
The path to export the interface at.
If interface_
has outstanding changes, request for these changes to be
emitted immediately.
For example, an exported D-Bus interface may queue up property
changes and emit the
org.freedesktop.DBus.Properties.PropertiesChanged
signal later (e.g. in an idle handler). This technique is useful
for collapsing multiple property changes into one.
This function is intended for #GObject implementations to re-enforce a [floating][floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink().
Increases the freeze count on object
. If the freeze count is
non-zero, the emission of "notify" signals on object
is
stopped. The signals are queued until the freeze count is decreased
to zero. Duplicate notifications are squashed so that at most one
#GObject::notify signal is emitted for each property modified while the
object is frozen.
This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Gets the first connection that interface_
is exported on, if any.
Gets a list of the connections that interface_
is exported on.
Gets a named field from the objects table of associations (see g_object_set_data()).
name of the key for that association
Gets the #GDBusInterfaceSkeletonFlags that describes what the behavior
of interface_
Gets D-Bus introspection information for the D-Bus interface
implemented by interface_
.
Gets the #GDBusObject that interface_
belongs to, if any.
Gets the object path that interface_
is exported on, if any.
Gets a property of an object.
The value
can be:
In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().
Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.
the name of the property to get
return location for the property value
This function gets back user data pointers stored via g_object_set_qdata().
A #GQuark, naming the user data pointer
Gets n_properties
properties for an object
.
Obtained properties will be set to values
. All properties must be valid.
Warnings will be emitted and undefined behaviour may result if invalid
properties are passed in.
the names of each property to get
the values of each property to get
Checks if interface_
is exported on connection
.
A #GDBusConnection.
Checks whether object
has a [floating][floating-ref] reference.
Emits a "notify" signal for the property property_name
on object
.
When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.
the name of a property installed on the class of object
.
Emits a "notify" signal for the property specified by pspec
on object
.
This function omits the property name lookup, hence it is faster than g_object_notify().
One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:
enum
{
PROP_0,
PROP_FOO,
PROP_LAST
};
static GParamSpec *properties[PROP_LAST];
static void
my_object_class_init (MyObjectClass *klass)
{
properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
0, 100,
50,
G_PARAM_READWRITE);
g_object_class_install_property (gobject_class,
PROP_FOO,
properties[PROP_FOO]);
}
and then notify a change on the "foo" property with:
g_object_notify_by_pspec (self, properties[PROP_FOO]);
the #GParamSpec of a property installed on the class of object
.
Increase the reference count of object,
and possibly remove the
[floating][floating-ref] reference, if object
has a floating reference.
In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.
Since GLib 2.56, the type of object
will be propagated to the return type
under the same conditions as for g_object_ref().
Releases all references to other objects. This can be used to break reference cycles.
This function should only be called from object system implementations.
Each object carries around a table of associations from strings to pointers. This function lets you set an association.
If the object already had an association with that name, the old association will be destroyed.
Internally, the key
is converted to a #GQuark using g_quark_from_string().
This means a copy of key
is kept permanently (even after object
has been
finalized) — so it is recommended to only use a small, bounded set of values
for key
in your program, to avoid the #GQuark storage growing unbounded.
name of the key
data to associate with that key
Sets flags describing what the behavior of skeleton
should be.
Flags from the #GDBusInterfaceSkeletonFlags enumeration.
Sets the #GDBusObject for interface_
to object
.
Note that interface_
will hold a weak reference to object
.
A #GDBusObject or %NULL.
Sets a property on an object.
the name of the property to set
the value
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
name of the key
This function gets back user data pointers stored via
g_object_set_qdata() and removes the data
from object
without invoking its destroy() function (if any was
set).
Usually, calling this function is only required to update
user data pointers with a destroy notifier, for example:
void
object_add_to_user_list (GObject *object,
const gchar *new_string)
{
// the quark, naming the object data
GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
// retrieve the old string list
GList *list = g_object_steal_qdata (object, quark_string_list);
// prepend new string
list = g_list_prepend (list, g_strdup (new_string));
// this changed 'list', so we need to set it again
g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
GList *node, *list = data;
for (node = list; node; node = node->next)
g_free (node->data);
g_list_free (list);
}
Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().
A #GQuark, naming the user data pointer
Reverts the effect of a previous call to
g_object_freeze_notify(). The freeze count is decreased on object
and when it reaches zero, queued "notify" signals are emitted.
Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.
It is an error to call this function when the freeze count is zero.
Stops exporting interface_
on all connections it is exported on.
To unexport interface_
from only a single connection, use
g_dbus_interface_skeleton_unexport_from_connection()
Stops exporting interface_
on connection
.
To stop exporting on all connections the interface is exported on, use g_dbus_interface_skeleton_unexport().
A #GDBusConnection.
Decreases the reference count of object
. When its reference count
drops to 0, the object is finalized (i.e. its memory is freed).
If the pointer to the #GObject may be reused in future (for example, if it is an instance variable of another object), it is recommended to clear the pointer to %NULL rather than retain a dangling pointer to a potentially invalid #GObject instance. Use g_clear_object() for this.
This function essentially limits the life time of the closure
to
the life time of the object. That is, when the object is finalized,
the closure
is invalidated by calling g_closure_invalidate() on
it, in order to prevent invocations of the closure with a finalized
(nonexisting) object. Also, g_object_ref() and g_object_unref() are
added as marshal guards to the closure,
to ensure that an extra
reference count is held on object
during invocation of the
closure
. Usually, this function will be called on closures that
use this object
as closure data.
#GClosure to watch
Find the #GParamSpec with the given name for an
interface. Generally, the interface vtable passed in as g_iface
will be the default vtable from g_type_default_interface_ref(), or,
if you know the interface has already been loaded,
g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
name of a property to look up.
Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created #GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.
This function is meant to be called from the interface's default
vtable initialization function (the class_init
member of
#GTypeInfo.) It must not be called after after class_init
has
been called for any object types implementing this interface.
If pspec
is a floating reference, it will be consumed.
any interface vtable for the interface, or the default vtable for the interface.
the #GParamSpec for the new property
Lists the properties of an interface.Generally, the interface
vtable passed in as g_iface
will be the default vtable from
g_type_default_interface_ref(), or, if you know the interface has
already been loaded, g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
Creates a skeleton object for the D-Bus interface org.freedesktop.ModemManager1.Modem.Voice.
Creates a new instance of a #GObject subtype and sets its properties.
Construction parameters (see %G_PARAM_CONSTRUCT, %G_PARAM_CONSTRUCT_ONLY) which are not explicitly specified are set to their default values.
the type id of the #GObject subtype to instantiate
an array of #GParameter
The #MmGdbusModemVoiceSkeleton structure contains only private data and should only be accessed using the provided API.