GstPlayVideoRenderer to use
flags for this object
The name of the object
this object's parent, weak ref
Attach the #GstControlBinding to the object. If there already was a #GstControlBinding for this property it will be replaced.
The object's reference count will be incremented, and any floating reference will be removed (see gst_object_ref_sink())
the #GstControlBinding that should be used
Creates a binding between source_property on source and target_property
on target.
Whenever the source_property is changed the target_property is
updated using the same value. For instance:
g_object_bind_property (action, "active", widget, "sensitive", 0);
Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.
If flags contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual:
if target_property on target changes then the source_property on source
will be updated as well.
The binding will automatically be removed when either the source or the
target instances are finalized. To remove the binding without affecting the
source and the target you can just call g_object_unref() on the returned
#GBinding instance.
Removing the binding by calling g_object_unref() on it must only be done if
the binding, source and target are only used from a single thread and it
is clear that both source and target outlive the binding. Especially it
is not safe to rely on this if the binding, source or target can be
finalized from different threads. Keep another reference to the binding and
use g_binding_unbind() instead to be on the safe side.
A #GObject can have multiple bindings.
the property on source to bind
the target #GObject
the property on target to bind
flags to pass to #GBinding
Creates a binding between source_property on source and target_property
on target, allowing you to set the transformation functions to be used by
the binding.
This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.
the property on source to bind
the target #GObject
the property on target to bind
flags to pass to #GBinding
a #GClosure wrapping the transformation function from the source to the target, or %NULL to use the default
a #GClosure wrapping the transformation function from the target to the source, or %NULL to use the default
This function is intended for #GObject implementations to re-enforce a [floating][floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink().
Increases the freeze count on object. If the freeze count is
non-zero, the emission of "notify" signals on object is
stopped. The signals are queued until the freeze count is decreased
to zero. Duplicate notifications are squashed so that at most one
#GObject::notify signal is emitted for each property modified while the
object is frozen.
This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Retrieve the current value of audio-video-offset property
Retrieve the current value of the indicated type.
#GstPlayColorBalanceType
Gets the corresponding #GstControlBinding for the property. This should be unreferenced again after use.
name of the property
Obtain the control-rate for this object. Audio processing #GstElement
objects will use this rate to sub-divide their processing loop and call
gst_object_sync_values() in between. The length of the processing segment
should be up to control-rate nanoseconds.
If the object is not under property control, this will return
%GST_CLOCK_TIME_NONE. This allows the element to avoid the sub-dividing.
The control-rate is not expected to change if the element is in %GST_STATE_PAUSED or %GST_STATE_PLAYING.
A Function to get current audio #GstPlayAudioInfo instance.
A Function to get current subtitle #GstPlaySubtitleInfo instance.
A Function to get current video #GstPlayVideoInfo instance.
Gets a named field from the objects table of associations (see g_object_set_data()).
name of the key for that association
Retrieves the duration of the media stream that self represents.
Gets a number of #GValues for the given controlled property starting at the
requested time. The array values need to hold enough space for n_values of
#GValue.
This function is useful if one wants to e.g. draw a graph of the control curve or apply a control curve sample by sample.
the name of the property to get
the time that should be processed
the time spacing between subsequent values
array to put control-values in
A Function to get the current media info #GstPlayMediaInfo instance.
GstPlay API exposes a #GstBus instance which purpose is to provide data structures representing play-internal events in form of #GstMessages of type GST_MESSAGE_APPLICATION.
Each message carries a "play-message" field of type #GstPlayMessage. Further fields of the message data are specific to each possible value of that enumeration.
Applications can consume the messages asynchronously within their own event-loop / UI-thread etc. Note that in case the application does not consume the messages, the bus will accumulate these internally and eventually fill memory. To avoid that, the bus has to be set "flushing".
Retrieve the current value of the indicated type.
Retrieve the current value of the indicated type.
Returns a copy of the name of object.
Caller should g_free() the return value after usage.
For a nameless object, this returns %NULL, which you can safely g_free()
as well.
Free-function: g_free
Generates a string describing the path of object in
the object hierarchy. Only useful (or used) for debugging.
Free-function: g_free
Gets a property of an object.
The value can be:
In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().
Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.
the name of the property to get
return location for the property value
This function gets back user data pointers stored via g_object_set_qdata().
A #GQuark, naming the user data pointer
current subtitle URI
Retrieve the current value of subtitle-video-offset property
Gets the URI of the currently-playing stream.
Gets the value for the given controlled property at the requested time.
the name of the property to get
the time the control-change should be read from
Get a snapshot of the currently selected video stream, if any. The format can be
selected with format and optional configuration is possible with config
Currently supported settings are:
output format of the video snapshot
Additional configuration
Returns the current volume level, as a percentage between 0 and 1.
Gets n_properties properties for an object.
Obtained properties will be set to values. All properties must be valid.
Warnings will be emitted and undefined behaviour may result if invalid
properties are passed in.
the names of each property to get
the values of each property to get
Check if the object has active controlled properties.
Checks whether the play has color balance support available.
Checks whether object has a [floating][floating-ref] reference.
Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.
the name of a property installed on the class of object.
Emits a "notify" signal for the property specified by pspec on object.
This function omits the property name lookup, hence it is faster than g_object_notify().
One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:
enum
{
PROP_0,
PROP_FOO,
PROP_LAST
};
static GParamSpec *properties[PROP_LAST];
static void
my_object_class_init (MyObjectClass *klass)
{
properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
0, 100,
50,
G_PARAM_READWRITE);
g_object_class_install_property (gobject_class,
PROP_FOO,
properties[PROP_FOO]);
}
and then notify a change on the "foo" property with:
g_object_notify_by_pspec (self, properties[PROP_FOO]);
the #GParamSpec of a property installed on the class of object.
Pauses the current stream.
Request to play the loaded stream.
Increments the reference count on object. This function
does not take the lock on object because it relies on
atomic refcounting.
This object returns the input parameter to ease writing constructs like : result = gst_object_ref (object->parent);
Increase the reference count of object, and possibly remove the
[floating][floating-ref] reference, if object has a floating reference.
In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.
Since GLib 2.56, the type of object will be propagated to the return type
under the same conditions as for g_object_ref().
Removes the corresponding #GstControlBinding. If it was the last ref of the binding, it will be disposed.
the binding
Releases all references to other objects. This can be used to break reference cycles.
This function should only be called from object system implementations.
Seeks the currently-playing stream to the absolute position time
in nanoseconds.
position to seek in nanoseconds
Enable or disable the current audio track.
TRUE or FALSE
Sets audio-video-offset property by value of offset
#gint64 in nanoseconds
Sets the current value of the indicated channel type to the passed
value.
#GstPlayColorBalanceType
The new value for the type, ranged [0,1]
Set the configuration of the play. If the play is already configured, and the configuration haven't change, this function will return %TRUE. If the play is not in the GST_PLAY_STATE_STOPPED, this method will return %FALSE and active configuration will remain.
config is a #GstStructure that contains the configuration parameters for
the play.
This function takes ownership of config.
This function is used to disable the control bindings on a property for some time, i.e. gst_object_sync_values() will do nothing for the property.
property to disable
boolean that specifies whether to disable the controller or not.
This function is used to disable all controlled properties of the object for
some time, i.e. gst_object_sync_values() will do nothing.
boolean that specifies whether to disable the controller or not.
Change the control-rate for this object. Audio processing #GstElement
objects will use this rate to sub-divide their processing loop and call
gst_object_sync_values() in between. The length of the processing segment
should be up to control-rate nanoseconds.
The control-rate should not change if the element is in %GST_STATE_PAUSED or %GST_STATE_PLAYING.
the new control-rate in nanoseconds.
Each object carries around a table of associations from strings to pointers. This function lets you set an association.
If the object already had an association with that name, the old association will be destroyed.
Internally, the key is converted to a #GQuark using g_quark_from_string().
This means a copy of key is kept permanently (even after object has been
finalized) — so it is recommended to only use a small, bounded set of values
for key in your program, to avoid the #GQuark storage growing unbounded.
name of the key
data to associate with that key
Sets the current value of the indicated mode type to the passed
value.
The new value for the type
Sets the current value of the indicated mode type to the passed
value.
The new value for the type
%TRUE if the currently-playing stream should be muted.
Mute state the should be set
Sets the name of object, or gives object a guaranteed unique
name (if name is %NULL).
This function makes a copy of the provided name, so the caller
retains ownership of the name it sent.
new name of object
Sets a property on an object.
the name of the property to set
the value
Playback at specified rate
playback rate
Enable or disable the current subtitle track.
TRUE or FALSE
Sets the external subtitle URI. This should be combined with a call to
gst_play_set_subtitle_track_enabled(play, TRUE) so the subtitles are actually
rendered.
subtitle URI
Sets subtitle-video-offset property by value of offset
#gint64 in nanoseconds
Sets the next URI to play.
next URI to play.
Enable or disable the current video track.
TRUE or FALSE
Enable or disable the visualization.
TRUE or FALSE
Sets the volume level of the stream as a percentage between 0 and 1.
the new volume level, as a percentage between 0 and 1
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
name of the key
This function gets back user data pointers stored via
g_object_set_qdata() and removes the data from object
without invoking its destroy() function (if any was
set).
Usually, calling this function is only required to update
user data pointers with a destroy notifier, for example:
void
object_add_to_user_list (GObject *object,
const gchar *new_string)
{
// the quark, naming the object data
GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
// retrieve the old string list
GList *list = g_object_steal_qdata (object, quark_string_list);
// prepend new string
list = g_list_prepend (list, g_strdup (new_string));
// this changed 'list', so we need to set it again
g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
GList *node, *list = data;
for (node = list; node; node = node->next)
g_free (node->data);
g_list_free (list);
}
Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().
A #GQuark, naming the user data pointer
Stops playing the current stream and resets to the first position in the stream.
Returns a suggestion for timestamps where buffers should be split to get best controller results.
Sets the properties of the object, according to the #GstControlSources that (maybe) handle them and for the given timestamp.
If this function fails, it is most likely the application developers fault. Most probably the control sources are not setup correctly.
the time that should be processed
Reverts the effect of a previous call to
g_object_freeze_notify(). The freeze count is decreased on object
and when it reaches zero, queued "notify" signals are emitted.
Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.
It is an error to call this function when the freeze count is zero.
Clear the parent of object, removing the associated reference.
This function decreases the refcount of object.
MT safe. Grabs and releases object's lock.
Decrements the reference count on object. If reference count hits
zero, destroy object. This function does not take the lock
on object as it relies on atomic refcounting.
The unref method should never be called with the LOCK held since this might deadlock the dispose function.
This function essentially limits the life time of the closure to
the life time of the object. That is, when the object is finalized,
the closure is invalidated by calling g_closure_invalidate() on
it, in order to prevent invocations of the closure with a finalized
(nonexisting) object. Also, g_object_ref() and g_object_unref() are
added as marshal guards to the closure, to ensure that an extra
reference count is held on object during invocation of the
closure. Usually, this function will be called on closures that
use this object as closure data.
#GClosure to watch
Checks to see if there is any object named name in list. This function
does not do any locking of any kind. You might want to protect the
provided list with the lock of the owner of the list. This function
will lock each #GstObject in the list to compare the name, so be
careful when passing a list with a locked object.
Enable or disable accurate seeking. When enabled, elements will try harder to seek as accurately as possible to the requested seek position. Generally it will be slower especially for formats that don't have any indexes or timestamp markers in the stream.
If accurate seeking is disabled, elements will seek as close as the request position without slowing down seeking too much.
Accurate seeking is disabled by default.
A default deep_notify signal callback for an object. The user data should contain a pointer to an array of strings that should be excluded from the notify. The default handler will print the new value of the property using g_print.
MT safe. This function grabs and releases object's LOCK for getting its
path string.
the #GObject that signalled the notify.
a #GstObject that initiated the notify.
a #GParamSpec of the property.
a set of user-specified properties to exclude or %NULL to show all changes.
Find the #GParamSpec with the given name for an
interface. Generally, the interface vtable passed in as g_iface
will be the default vtable from g_type_default_interface_ref(), or,
if you know the interface has already been loaded,
g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
name of a property to look up.
Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created #GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.
This function is meant to be called from the interface's default
vtable initialization function (the class_init member of
#GTypeInfo.) It must not be called after after class_init has
been called for any object types implementing this interface.
If pspec is a floating reference, it will be consumed.
any interface vtable for the interface, or the default vtable for the interface.
the #GParamSpec for the new property
Lists the properties of an interface.Generally, the interface
vtable passed in as g_iface will be the default vtable from
g_type_default_interface_ref(), or, if you know the interface has
already been loaded, g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
Creates a new #GstPlay instance.
Video is going to be rendered by video_renderer, or if %NULL is provided
no special video set up will be done and some default handling will be
performed.
GstPlayVideoRenderer to use
Creates a new instance of a #GObject subtype and sets its properties.
Construction parameters (see %G_PARAM_CONSTRUCT, %G_PARAM_CONSTRUCT_ONLY) which are not explicitly specified are set to their default values.
the type id of the #GObject subtype to instantiate
an array of #GParameter
Atomically modifies a pointer to point to a new object.
The reference count of oldobj is decreased and the reference count of
newobj is increased.
Either newobj and the value pointed to by oldobj may be %NULL.
pointer to a place of a #GstObject to replace
a new #GstObject
Frees a %NULL terminated array of #GstPlayVisualization.
a %NULL terminated array of #GstPlayVisualization to free
Creates a new #GstPlay instance.
Video is going to be rendered by
video_renderer,or if %NULL is provided no special video set up will be done and some default handling will be performed.