a #TpConnection or #TpChannel parent for this object, whose invalidation will also result in invalidation of the returned object
the object path of this TLS certificate
The D-Bus bus name for this object. Read-only except during construction.
The raw data of the certificate or certificate chain, represented as a #GPtrArray of #GBytes. It should be interpreted according to #TpTLSCertificate:cert-type.
The first certificate in this array is the server's certificate, followed by its issuer, followed by the issuer's issuer and so on.
For "x509" certificates, each certificate is an X.509 certificate in binary (DER) format.
For "pgp" certificates, each certificate is a binary OpenPGP key.
The type of the certificate, typically either "x509" or "pgp".
The D-Bus daemon for this object (this object itself, if it is a TpDBusDaemon). Read-only except during construction.
The #TpSimpleClientFactory used to create this proxy, or %NULL if this proxy was not created through a factory.
Known D-Bus interface names for this object.
The D-Bus object path for this object. Read-only except during construction.
A #TpConnection or #TpChannel which owns this TLS certificate. If the parent object is invalidated, the certificate is also invalidated, and this property is set to %NULL.
The state of this TLS certificate as a #TpTLSCertificateState, initially %TP_TLS_CERTIFICATE_STATE_PENDING.
#GObject::notify::state will be emitted when this changes.
Accept this certificate, asynchronously. In or after callback,
you may call tp_tls_certificate_accept_finish() to check the result.
#GObject::notify::state will also be emitted when the connection manager signals that the certificate has been accepted.
called on success or failure
Check the result of tp_tls_certificate_accept_async().
the result passed to the callback by tp_tls_certificate_accept_async()
Add a pending reason for rejection. The first call to this method is considered "most important". After calling this method as many times as are required, call tp_tls_certificate_reject_async() to reject the certificate.
If details is a floating reference (see g_variant_ref_sink()),
ownership of details is taken by this function. This means
you can pass the result of g_variant_new() or g_variant_new_parsed()
directly to this function without additional reference-count management.
the reason for rejection
a D-Bus error name such as %TP_ERROR_STR_CERT_REVOKED, or %NULL to derive one from reason
a variant of type %G_VARIANT_TYPE_VARDICT containing the details of the rejection, or %NULL
Creates a binding between source_property on source and target_property
on target.
Whenever the source_property is changed the target_property is
updated using the same value. For instance:
g_object_bind_property (action, "active", widget, "sensitive", 0);
Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.
If flags contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual:
if target_property on target changes then the source_property on source
will be updated as well.
The binding will automatically be removed when either the source or the
target instances are finalized. To remove the binding without affecting the
source and the target you can just call g_object_unref() on the returned
#GBinding instance.
Removing the binding by calling g_object_unref() on it must only be done if
the binding, source and target are only used from a single thread and it
is clear that both source and target outlive the binding. Especially it
is not safe to rely on this if the binding, source or target can be
finalized from different threads. Keep another reference to the binding and
use g_binding_unbind() instead to be on the safe side.
A #GObject can have multiple bindings.
the property on source to bind
the target #GObject
the property on target to bind
flags to pass to #GBinding
Creates a binding between source_property on source and target_property
on target, allowing you to set the transformation functions to be used by
the binding.
This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.
the property on source to bind
the target #GObject
the property on target to bind
flags to pass to #GBinding
a #GClosure wrapping the transformation function from the source to the target, or %NULL to use the default
a #GClosure wrapping the transformation function from the target to the source, or %NULL to use the default
Convert a D-Bus error name into a GError as if it was returned by a method on this proxy. This method is useful when D-Bus error names are emitted in signals, such as Connection.ConnectionError and Group.MembersChangedDetailed.
a D-Bus error name, for instance from the callback for tp_cli_connection_connect_to_connection_error()
a debug message that accompanied the error name, or %NULL
This function is intended for #GObject implementations to re-enforce a [floating][floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink().
Increases the freeze count on object. If the freeze count is
non-zero, the emission of "notify" signals on object is
stopped. The signals are queued until the freeze count is decreased
to zero. Duplicate notifications are squashed so that at most one
#GObject::notify signal is emitted for each property modified while the
object is frozen.
This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Return the #TpTLSCertificate:cert-data property
Return the #TpTLSCertificate:cert-type property
Gets a named field from the objects table of associations (see g_object_set_data()).
name of the key for that association
If this certificate has been rejected and n is less than the number of
rejection reasons, return a #TpTLSCertificateRejection representing the
n<!---->th rejection reason (starting from 0).
With n == 0 this is equivalent to tp_tls_certificate_get_rejection().
the rejection reason to return; if 0, return the same thing as tp_tls_certificate_get_detailed_rejection()
Gets a property of an object.
The value can be:
In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().
Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.
the name of the property to get
return location for the property value
This function gets back user data pointers stored via g_object_set_qdata().
A #GQuark, naming the user data pointer
If this certificate has been rejected, return a #TpTLSCertificateRejection indicating the first rejection reason (by convention, the most important).
If you want to list all the things that are wrong with the certificate
(for instance, it might be self-signed and also have expired)
you can call tp_tls_certificate_get_nth_rejection(), increasing n until
it returns %NULL.
Return the #TpTLSCertificate:state property
Gets n_properties properties for an object.
Obtained properties will be set to values. All properties must be valid.
Warnings will be emitted and undefined behaviour may result if invalid
properties are passed in.
the names of each property to get
the values of each property to get
Return whether this proxy is known to have a particular interface. In versions older than 0.11.11, this was a macro wrapper around tp_proxy_has_interface_by_id().
For objects that discover their interfaces at runtime, this method will indicate that interfaces are missing until they are known to be present. In subclasses that define features for use with tp_proxy_prepare_async(), successfully preparing the "core" feature for that subclass (such as %TP_CHANNEL_FEATURE_CORE or %TP_CONNECTION_FEATURE_CORE) implies that the interfaces are known.
the D-Bus interface required, as a string
Return whether this proxy is known to have a particular interface, by its quark ID. This is equivalent to using g_quark_to_string() followed by tp_proxy_has_interface(), but more efficient.
quark representing the D-Bus interface required
Checks whether object has a [floating][floating-ref] reference.
Return %TRUE if feature has been prepared successfully, or %FALSE if
feature has not been requested, has not been prepared yet, or is not
available on this object at all.
(For instance, if feature is %TP_CHANNEL_FEATURE_CHAT_STATES and self
is a #TpChannel in a protocol that doesn't actually implement chat states,
or is not a #TpChannel at all, then this method will return %FALSE.)
To prepare features, call tp_proxy_prepare_async().
a feature that is supported by self's class
Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.
the name of a property installed on the class of object.
Emits a "notify" signal for the property specified by pspec on object.
This function omits the property name lookup, hence it is faster than g_object_notify().
One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:
enum
{
PROP_0,
PROP_FOO,
PROP_LAST
};
static GParamSpec *properties[PROP_LAST];
static void
my_object_class_init (MyObjectClass *klass)
{
properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
0, 100,
50,
G_PARAM_READWRITE);
g_object_class_install_property (gobject_class,
PROP_FOO,
properties[PROP_FOO]);
}
and then notify a change on the "foo" property with:
g_object_notify_by_pspec (self, properties[PROP_FOO]);
the #GParamSpec of a property installed on the class of object.
#TpProxy itself does not support any features, but subclasses like #TpChannel can support features, which can either be core functionality like %TP_CHANNEL_FEATURE_CORE, or extended functionality like %TP_CHANNEL_FEATURE_CHAT_STATES.
Proxy instances start with no features prepared. When features are requested via tp_proxy_prepare_async(), the proxy starts to do the necessary setup to use those features.
tp_proxy_prepare_async() always waits for core functionality of the proxy's class to be prepared, even if it is not specifically requested: for instance, because %TP_CHANNEL_FEATURE_CORE is core functionality of a #TpChannel,
|[ TpChannel *channel = ...;
tp_proxy_prepare_async (channel, NULL, callback, user_data);
is equivalent to
|[
TpChannel *channel = ...;
GQuark features[] = { TP_CHANNEL_FEATURE_CORE, 0 };
tp_proxy_prepare_async (channel, features, callback, user_data);
If a feature represents core functionality (like %TP_CHANNEL_FEATURE_CORE), failure to prepare it will result in tp_proxy_prepare_async() finishing unsuccessfully: if failure to prepare the feature indicates that the proxy is no longer useful, it will also emit #TpProxy::invalidated.
If a feature represents non-essential functionality (like %TP_CHANNEL_FEATURE_CHAT_STATES), or is not supported by the object at all, then failure to prepare it is not fatal: tp_proxy_prepare_async() will complete successfully, but tp_proxy_is_prepared() will still return %FALSE for the feature, and accessor methods for the feature will typically return a dummy value.
Some #TpProxy subclasses automatically start to prepare their core features when instantiated, and features will sometimes become prepared as a side-effect of other actions, but to ensure that a feature is present you must generally call tp_proxy_prepare_async() and wait for the result.
an array of desired features, ending with 0; %NULL is equivalent to an array containing only 0
if not %NULL, called exactly once, when the features have all been prepared or failed to prepare, or after the proxy is invalidated
Check for error in a call to tp_proxy_prepare_async(). An error here
generally indicates that either the asynchronous call was cancelled,
or self has emitted #TpProxy::invalidated.
the result passed to the callback of tp_proxy_prepare_async()
Increase the reference count of object, and possibly remove the
[floating][floating-ref] reference, if object has a floating reference.
In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.
Since GLib 2.56, the type of object will be propagated to the return type
under the same conditions as for g_object_ref().
Reject this certificate, asynchronously.
Before calling this method, you must call tp_tls_certificate_add_rejection() at least once, to set the reason(s) for rejection (for instance, a certificate might be both self-signed and expired).
In or after callback,
you may call tp_tls_certificate_reject_finish() to check the result.
#GObject::notify::state will also be emitted when the connection manager signals that the certificate has been rejected.
called on success or failure
Check the result of tp_tls_certificate_reject_async().
the result passed to the callback by tp_tls_certificate_reject_async()
Releases all references to other objects. This can be used to break reference cycles.
This function should only be called from object system implementations.
Each object carries around a table of associations from strings to pointers. This function lets you set an association.
If the object already had an association with that name, the old association will be destroyed.
Internally, the key is converted to a #GQuark using g_quark_from_string().
This means a copy of key is kept permanently (even after object has been
finalized) — so it is recommended to only use a small, bounded set of values
for key in your program, to avoid the #GQuark storage growing unbounded.
name of the key
data to associate with that key
Sets a property on an object.
the name of the property to set
the value
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
name of the key
This function gets back user data pointers stored via
g_object_set_qdata() and removes the data from object
without invoking its destroy() function (if any was
set).
Usually, calling this function is only required to update
user data pointers with a destroy notifier, for example:
void
object_add_to_user_list (GObject *object,
const gchar *new_string)
{
// the quark, naming the object data
GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
// retrieve the old string list
GList *list = g_object_steal_qdata (object, quark_string_list);
// prepend new string
list = g_list_prepend (list, g_strdup (new_string));
// this changed 'list', so we need to set it again
g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
GList *node, *list = data;
for (node = list; node; node = node->next)
g_free (node->data);
g_list_free (list);
}
Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().
A #GQuark, naming the user data pointer
Reverts the effect of a previous call to
g_object_freeze_notify(). The freeze count is decreased on object
and when it reaches zero, queued "notify" signals are emitted.
Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.
It is an error to call this function when the freeze count is zero.
Decreases the reference count of object. When its reference count
drops to 0, the object is finalized (i.e. its memory is freed).
If the pointer to the #GObject may be reused in future (for example, if it is an instance variable of another object), it is recommended to clear the pointer to %NULL rather than retain a dangling pointer to a potentially invalid #GObject instance. Use g_clear_object() for this.
This function essentially limits the life time of the closure to
the life time of the object. That is, when the object is finalized,
the closure is invalidated by calling g_closure_invalidate() on
it, in order to prevent invocations of the closure with a finalized
(nonexisting) object. Also, g_object_ref() and g_object_unref() are
added as marshal guards to the closure, to ensure that an extra
reference count is held on object during invocation of the
closure. Usually, this function will be called on closures that
use this object as closure data.
#GClosure to watch
Ensure that the known interfaces for TpTLSCertificate have been set up. This is done automatically when necessary, but for correct overriding of library interfaces by local extensions, you should call this function before calling tp_proxy_or_subclass_hook_on_interface_add() with first argument %TP_TYPE_TLS_CERTIFICATE.
Find the #GParamSpec with the given name for an
interface. Generally, the interface vtable passed in as g_iface
will be the default vtable from g_type_default_interface_ref(), or,
if you know the interface has already been loaded,
g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
name of a property to look up.
Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created #GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.
This function is meant to be called from the interface's default
vtable initialization function (the class_init member of
#GTypeInfo.) It must not be called after after class_init has
been called for any object types implementing this interface.
If pspec is a floating reference, it will be consumed.
any interface vtable for the interface, or the default vtable for the interface.
the #GParamSpec for the new property
Lists the properties of an interface.Generally, the interface
vtable passed in as g_iface will be the default vtable from
g_type_default_interface_ref(), or, if you know the interface has
already been loaded, g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
a #TpConnection or #TpChannel parent for this object, whose invalidation will also result in invalidation of the returned object
the object path of this TLS certificate
Creates a new instance of a #GObject subtype and sets its properties.
Construction parameters (see %G_PARAM_CONSTRUCT, %G_PARAM_CONSTRUCT_ONLY) which are not explicitly specified are set to their default values.
the type id of the #GObject subtype to instantiate
an array of #GParameter
A #TpProxy subclass representing a server or peer's TLS certificate being presented for acceptance/rejection.