Asynchronously sends a Attach Detach request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_attach_detach_finish() to get the result of the operation.
a #QmiMessageNasAttachDetachInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_attach_detach().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_attach_detach().
Creates a binding between source_property on source and target_property
on target.
Whenever the source_property is changed the target_property is
updated using the same value. For instance:
g_object_bind_property (action, "active", widget, "sensitive", 0);
Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.
If flags contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual:
if target_property on target changes then the source_property on source
will be updated as well.
The binding will automatically be removed when either the source or the
target instances are finalized. To remove the binding without affecting the
source and the target you can just call g_object_unref() on the returned
#GBinding instance.
Removing the binding by calling g_object_unref() on it must only be done if
the binding, source and target are only used from a single thread and it
is clear that both source and target outlive the binding. Especially it
is not safe to rely on this if the binding, source or target can be
finalized from different threads. Keep another reference to the binding and
use g_binding_unbind() instead to be on the safe side.
A #GObject can have multiple bindings.
the property on source to bind
the target #GObject
the property on target to bind
flags to pass to #GBinding
Creates a binding between source_property on source and target_property
on target, allowing you to set the transformation functions to be used by
the binding.
This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.
the property on source to bind
the target #GObject
the property on target to bind
flags to pass to #GBinding
a #GClosure wrapping the transformation function from the source to the target, or %NULL to use the default
a #GClosure wrapping the transformation function from the target to the source, or %NULL to use the default
Checks if the version of the service handled by this #QmiClient is greater or equal than the given version.
a major version.
a minor version.
Asynchronously sends a Config Signal Info request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_config_signal_info_finish() to get the result of the operation.
a #QmiMessageNasConfigSignalInfoInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_config_signal_info().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_config_signal_info().
This function is intended for #GObject implementations to re-enforce a [floating][floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink().
Asynchronously sends a Force Network Search request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_force_network_search_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_force_network_search().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_force_network_search().
Increases the freeze count on object. If the freeze count is
non-zero, the emission of "notify" signals on object is
stopped. The signals are queued until the freeze count is decreased
to zero. Duplicate notifications are squashed so that at most one
#GObject::notify signal is emitted for each property modified while the
object is frozen.
This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Asynchronously sends a Get CDMA Position Info request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_get_cdma_position_info_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_get_cdma_position_info().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_get_cdma_position_info().
Asynchronously sends a Get Cell Location Info request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_get_cell_location_info_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_get_cell_location_info().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_get_cell_location_info().
Get the client ID of this #QmiClient.
Gets a named field from the objects table of associations (see g_object_set_data()).
name of the key for that association
Asynchronously sends a Get DRX request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_get_drx_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_get_drx().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_get_drx().
Asynchronously sends a Get Home Network request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_get_home_network_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_get_home_network().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_get_home_network().
Asynchronously sends a Get LTE Cphy CA Info request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_get_lte_cphy_ca_info_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_get_lte_cphy_ca_info().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_get_lte_cphy_ca_info().
Acquire the next transaction ID of this #QmiClient. The internal transaction ID gets incremented.
Asynchronously sends a Get Operator Name request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_get_operator_name_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_get_operator_name().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_get_operator_name().
Asynchronously sends a Get PLMN Name request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_get_plmn_name_finish() to get the result of the operation.
a #QmiMessageNasGetPlmnNameInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_get_plmn_name().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_get_plmn_name().
Asynchronously sends a Get Preferred Networks request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_get_preferred_networks_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_get_preferred_networks().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_get_preferred_networks().
Gets a property of an object.
The value can be:
In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().
Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.
the name of the property to get
return location for the property value
This function gets back user data pointers stored via g_object_set_qdata().
A #GQuark, naming the user data pointer
Asynchronously sends a Get RF Band Information request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_get_rf_band_information_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_get_rf_band_information().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_get_rf_band_information().
Asynchronously sends a Get Serving System request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_get_serving_system_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_get_serving_system().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_get_serving_system().
Asynchronously sends a Get Signal Info request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_get_signal_info_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_get_signal_info().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_get_signal_info().
Asynchronously sends a Get Signal Strength request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_get_signal_strength_finish() to get the result of the operation.
a #QmiMessageNasGetSignalStrengthInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_get_signal_strength().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_get_signal_strength().
Asynchronously sends a Get Supported Messages request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_get_supported_messages_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_get_supported_messages().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_get_supported_messages().
Asynchronously sends a Get System Info request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_get_system_info_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_get_system_info().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_get_system_info().
Asynchronously sends a Get System Selection Preference request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_get_system_selection_preference_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_get_system_selection_preference().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_get_system_selection_preference().
Asynchronously sends a Get Technology Preference request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_get_technology_preference_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_get_technology_preference().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_get_technology_preference().
Asynchronously sends a Get Tx Rx Info request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_get_tx_rx_info_finish() to get the result of the operation.
a #QmiMessageNasGetTxRxInfoInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_get_tx_rx_info().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_get_tx_rx_info().
Get the version of the service handled by this #QmiClient.
placeholder for the output major version.
placeholder for the output minor version.
Gets n_properties properties for an object.
Obtained properties will be set to values. All properties must be valid.
Warnings will be emitted and undefined behaviour may result if invalid
properties are passed in.
the names of each property to get
the values of each property to get
Asynchronously sends a Initiate Network Register request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_initiate_network_register_finish() to get the result of the operation.
a #QmiMessageNasInitiateNetworkRegisterInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_initiate_network_register().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_initiate_network_register().
Checks whether object has a [floating][floating-ref] reference.
Checks whether #QmiClient is a valid and usable client.
The client is marked as invalid as soon as the client id is released or when the associated #QmiDevice is closed.
This method may be used if the caller needs to ensure validity before a command is attempted, e.g. if the lifecycle of the object is managed in some other place and the caller just has a reference to the #QmiClient.
Asynchronously sends a Network Scan request to the device.
This message is abortable. If cancellable is cancelled or if timeout expires,
an abort request will be sent to the device, and the asynchronous operation will
not return until the abort response is received. It is not an error if a successful
response is returned for the asynchronous operation even after the user has cancelled
the cancellable, because it may happen that the response is received before the
modem had a chance to run the abort.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_network_scan_finish() to get the result of the operation.
a #QmiMessageNasNetworkScanInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_network_scan().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_network_scan().
Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.
the name of a property installed on the class of object.
Emits a "notify" signal for the property specified by pspec on object.
This function omits the property name lookup, hence it is faster than g_object_notify().
One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:
enum
{
PROP_0,
PROP_FOO,
PROP_LAST
};
static GParamSpec *properties[PROP_LAST];
static void
my_object_class_init (MyObjectClass *klass)
{
properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
0, 100,
50,
G_PARAM_READWRITE);
g_object_class_install_property (gobject_class,
PROP_FOO,
properties[PROP_FOO]);
}
and then notify a change on the "foo" property with:
g_object_notify_by_pspec (self, properties[PROP_FOO]);
the #GParamSpec of a property installed on the class of object.
Increase the reference count of object, and possibly remove the
[floating][floating-ref] reference, if object has a floating reference.
In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.
Since GLib 2.56, the type of object will be propagated to the return type
under the same conditions as for g_object_ref().
Asynchronously sends a Register Indications request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_register_indications_finish() to get the result of the operation.
a #QmiMessageNasRegisterIndicationsInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_register_indications().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_register_indications().
Asynchronously sends a Reset request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_reset_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_reset().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_reset().
Releases all references to other objects. This can be used to break reference cycles.
This function should only be called from object system implementations.
Each object carries around a table of associations from strings to pointers. This function lets you set an association.
If the object already had an association with that name, the old association will be destroyed.
Internally, the key is converted to a #GQuark using g_quark_from_string().
This means a copy of key is kept permanently (even after object has been
finalized) — so it is recommended to only use a small, bounded set of values
for key in your program, to avoid the #GQuark storage growing unbounded.
name of the key
data to associate with that key
Asynchronously sends a Set Event Report request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_set_event_report_finish() to get the result of the operation.
a #QmiMessageNasSetEventReportInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_set_event_report().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_set_event_report().
Asynchronously sends a Set Preferred Networks request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_set_preferred_networks_finish() to get the result of the operation.
a #QmiMessageNasSetPreferredNetworksInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_set_preferred_networks().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_set_preferred_networks().
Sets a property on an object.
the name of the property to set
the value
Asynchronously sends a Set System Selection Preference request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_set_system_selection_preference_finish() to get the result of the operation.
a #QmiMessageNasSetSystemSelectionPreferenceInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_set_system_selection_preference().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_set_system_selection_preference().
Asynchronously sends a Set Technology Preference request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_set_technology_preference_finish() to get the result of the operation.
a #QmiMessageNasSetTechnologyPreferenceInput.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_set_technology_preference().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_set_technology_preference().
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
name of the key
This function gets back user data pointers stored via
g_object_set_qdata() and removes the data from object
without invoking its destroy() function (if any was
set).
Usually, calling this function is only required to update
user data pointers with a destroy notifier, for example:
void
object_add_to_user_list (GObject *object,
const gchar *new_string)
{
// the quark, naming the object data
GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
// retrieve the old string list
GList *list = g_object_steal_qdata (object, quark_string_list);
// prepend new string
list = g_list_prepend (list, g_strdup (new_string));
// this changed 'list', so we need to set it again
g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
GList *node, *list = data;
for (node = list; node; node = node->next)
g_free (node->data);
g_list_free (list);
}
Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().
A #GQuark, naming the user data pointer
Asynchronously sends a Swi Get Status request to the device.
When the operation is finished, callback will be invoked in the thread-default main loop of the thread you are calling this method from.
You can then call qmi_client_nas_swi_get_status_finish() to get the result of the operation.
%NULL. This message doesn't have any input bundle.
maximum time to wait for the method to complete, in seconds.
a #GCancellable or %NULL.
a #GAsyncReadyCallback to call when the request is satisfied.
Finishes an async operation started with qmi_client_nas_swi_get_status().
the #GAsyncResult obtained from the #GAsyncReadyCallback passed to qmi_client_nas_swi_get_status().
Reverts the effect of a previous call to
g_object_freeze_notify(). The freeze count is decreased on object
and when it reaches zero, queued "notify" signals are emitted.
Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.
It is an error to call this function when the freeze count is zero.
Decreases the reference count of object. When its reference count
drops to 0, the object is finalized (i.e. its memory is freed).
If the pointer to the #GObject may be reused in future (for example, if it is an instance variable of another object), it is recommended to clear the pointer to %NULL rather than retain a dangling pointer to a potentially invalid #GObject instance. Use g_clear_object() for this.
This function essentially limits the life time of the closure to
the life time of the object. That is, when the object is finalized,
the closure is invalidated by calling g_closure_invalidate() on
it, in order to prevent invocations of the closure with a finalized
(nonexisting) object. Also, g_object_ref() and g_object_unref() are
added as marshal guards to the closure, to ensure that an extra
reference count is held on object during invocation of the
closure. Usually, this function will be called on closures that
use this object as closure data.
#GClosure to watch
Find the #GParamSpec with the given name for an
interface. Generally, the interface vtable passed in as g_iface
will be the default vtable from g_type_default_interface_ref(), or,
if you know the interface has already been loaded,
g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
name of a property to look up.
Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created #GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.
This function is meant to be called from the interface's default
vtable initialization function (the class_init member of
#GTypeInfo.) It must not be called after after class_init has
been called for any object types implementing this interface.
If pspec is a floating reference, it will be consumed.
any interface vtable for the interface, or the default vtable for the interface.
the #GParamSpec for the new property
Lists the properties of an interface.Generally, the interface
vtable passed in as g_iface will be the default vtable from
g_type_default_interface_ref(), or, if you know the interface has
already been loaded, g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
Creates a new instance of a #GObject subtype and sets its properties.
Construction parameters (see %G_PARAM_CONSTRUCT, %G_PARAM_CONSTRUCT_ONLY) which are not explicitly specified are set to their default values.
the type id of the #GObject subtype to instantiate
an array of #GParameter
The #QmiClientNas structure contains private data and should only be accessed using the provided API.