Gjsify LogoGjsify Logo

A helper class for testing code which uses D-Bus without touching the user's session bus.

Note that #GTestDBus modifies the user’s environment, calling setenv(). This is not thread-safe, so all #GTestDBus calls should be completed before threads are spawned, or should have appropriate locking to ensure no access conflicts to environment variables shared between #GTestDBus and other threads.

Creating unit tests using GTestDBus

Testing of D-Bus services can be tricky because normally we only ever run D-Bus services over an existing instance of the D-Bus daemon thus we usually don't activate D-Bus services that are not yet installed into the target system. The #GTestDBus object makes this easier for us by taking care of the lower level tasks such as running a private D-Bus daemon and looking up uninstalled services in customizable locations, typically in your source code tree.

The first thing you will need is a separate service description file for the D-Bus daemon. Typically a services subdirectory of your tests directory is a good place to put this file.

The service file should list your service along with an absolute path to the uninstalled service executable in your source tree. Using autotools we would achieve this by adding a file such as my-server.service.in in the services directory and have it processed by configure. |[ [D-BUS Service] Name=org.gtk.GDBus.Examples.ObjectManager Exec=abs_top_builddir@/gio/tests/gdbus-example-objectmanager-server


You will also need to indicate this service directory in your test
fixtures, so you will need to pass the path while compiling your
test cases. Typically this is done with autotools with an added
preprocessor flag specified to compile your tests such as:
|[
-DTEST_SERVICES=\""$(abs_top_builddir)/tests/services"\"
Once you have a service definition file which is local to your source tree,

you can proceed to set up a GTest fixture using the #GTestDBus scaffolding.

An example of a test fixture for D-Bus services can be found here: gdbus-test-fixture.c

Note that these examples only deal with isolating the D-Bus aspect of your service. To successfully run isolated unit tests on your service you may need some additional modifications to your test case fixture. For example; if your service uses GSettings and installs a schema then it is important that your test service not load the schema in the ordinary installed location (chances are that your service and schema files are not yet installed, or worse; there is an older version of the schema file sitting in the install location).

Most of the time we can work around these obstacles using the environment. Since the environment is inherited by the D-Bus daemon created by #GTestDBus and then in turn inherited by any services the D-Bus daemon activates, using the setup routine for your fixture is a practical place to help sandbox your runtime environment. For the rather typical GSettings case we can work around this by setting GSETTINGS_SCHEMA_DIR to the in tree directory holding your schemas in the above fixture_setup() routine.

The GSettings schemas need to be locally pre-compiled for this to work. This can be achieved by compiling the schemas locally as a step before running test cases, an autotools setup might do the following in the directory holding schemas: |[ all-am: $(GLIB_COMPILE_SCHEMAS) .

CLEANFILES += gschemas.compiled

@class

Hierarchy

Index

Constructors

Properties

#GTestDBusFlags specifying the behaviour of the D-Bus session.

gTypeInstance: TypeInstance
$gtype: GType<TestDBus>
name: string

Methods

  • addServiceDir(path: string): void
  • Add a path where dbus-daemon will look up .service files. This can't be called after g_test_dbus_up().

    Parameters

    • path: string

      path to a directory containing .service files

    Returns void

  • Creates a binding between source_property on source and target_property on target.

    Whenever the source_property is changed the target_property is updated using the same value. For instance:

      g_object_bind_property (action, "active", widget, "sensitive", 0);
    

    Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.

    If flags contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual: if target_property on target changes then the source_property on source will be updated as well.

    The binding will automatically be removed when either the source or the target instances are finalized. To remove the binding without affecting the source and the target you can just call g_object_unref() on the returned #GBinding instance.

    Removing the binding by calling g_object_unref() on it must only be done if the binding, source and target are only used from a single thread and it is clear that both source and target outlive the binding. Especially it is not safe to rely on this if the binding, source or target can be finalized from different threads. Keep another reference to the binding and use g_binding_unbind() instead to be on the safe side.

    A #GObject can have multiple bindings.

    Parameters

    • sourceProperty: string

      the property on source to bind

    • target: GObject.Object

      the target #GObject

    • targetProperty: string

      the property on target to bind

    • flags: BindingFlags

      flags to pass to #GBinding

    Returns Binding

  • Creates a binding between source_property on source and target_property on target, allowing you to set the transformation functions to be used by the binding.

    This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.

    Parameters

    • sourceProperty: string

      the property on source to bind

    • target: GObject.Object

      the target #GObject

    • targetProperty: string

      the property on target to bind

    • flags: BindingFlags

      flags to pass to #GBinding

    • transformTo: TClosure<any, any>

      a #GClosure wrapping the transformation function from the source to the target, or %NULL to use the default

    • transformFrom: TClosure<any, any>

      a #GClosure wrapping the transformation function from the target to the source, or %NULL to use the default

    Returns Binding

  • connect(sigName: "notify::flags", callback: ((...args: any[]) => void)): number
  • connect(sigName: string, callback: ((...args: any[]) => void)): number
  • Parameters

    • sigName: "notify::flags"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns number

  • Parameters

    • sigName: string
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns number

  • down(): void
  • Stop the session bus started by g_test_dbus_up().

    This will wait for the singleton returned by g_bus_get() or g_bus_get_sync() to be destroyed. This is done to ensure that the next unit test won't get a leaked singleton from this test.

    Returns void

  • emit(sigName: "notify::flags", ...args: any[]): void
  • emit(sigName: string, ...args: any[]): void
  • forceFloating(): void
  • This function is intended for #GObject implementations to re-enforce a [floating][floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink().

    Returns void

  • freezeNotify(): void
  • Increases the freeze count on object. If the freeze count is non-zero, the emission of "notify" signals on object is stopped. The signals are queued until the freeze count is decreased to zero. Duplicate notifications are squashed so that at most one #GObject::notify signal is emitted for each property modified while the object is frozen.

    This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.

    Returns void

  • getBusAddress(): string
  • Get the address on which dbus-daemon is running. If g_test_dbus_up() has not been called yet, %NULL is returned. This can be used with g_dbus_connection_new_for_address().

    Returns string

  • getData(key?: string): object
  • Gets a named field from the objects table of associations (see g_object_set_data()).

    Parameters

    • Optional key: string

      name of the key for that association

    Returns object

  • getProperty(propertyName?: string, value?: any): void
  • Gets a property of an object.

    The value can be:

    • an empty #GValue initialized by %G_VALUE_INIT, which will be automatically initialized with the expected type of the property (since GLib 2.60)
    • a #GValue initialized with the expected type of the property
    • a #GValue initialized with a type to which the expected type of the property can be transformed

    In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().

    Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.

    Parameters

    • Optional propertyName: string

      the name of the property to get

    • Optional value: any

      return location for the property value

    Returns void

  • getQdata(quark: number): object
  • This function gets back user data pointers stored via g_object_set_qdata().

    Parameters

    • quark: number

      A #GQuark, naming the user data pointer

    Returns object

  • getv(names: string[], values: any[]): void
  • Gets n_properties properties for an object. Obtained properties will be set to values. All properties must be valid. Warnings will be emitted and undefined behaviour may result if invalid properties are passed in.

    Parameters

    • names: string[]

      the names of each property to get

    • values: any[]

      the values of each property to get

    Returns void

  • isFloating(): boolean
  • notify(propertyName: string): void
  • Emits a "notify" signal for the property property_name on object.

    When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.

    Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.

    Parameters

    • propertyName: string

      the name of a property installed on the class of object.

    Returns void

  • Emits a "notify" signal for the property specified by pspec on object.

    This function omits the property name lookup, hence it is faster than g_object_notify().

    One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:

      enum
    {
    PROP_0,
    PROP_FOO,
    PROP_LAST
    };

    static GParamSpec *properties[PROP_LAST];

    static void
    my_object_class_init (MyObjectClass *klass)
    {
    properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
    0, 100,
    50,
    G_PARAM_READWRITE);
    g_object_class_install_property (gobject_class,
    PROP_FOO,
    properties[PROP_FOO]);
    }

    and then notify a change on the "foo" property with:

      g_object_notify_by_pspec (self, properties[PROP_FOO]);
    

    Parameters

    • pspec: ParamSpec

      the #GParamSpec of a property installed on the class of object.

    Returns void

  • off(sigName: "notify::flags", callback: ((...args: any[]) => void)): EventEmitter
  • off(sigName: string, callback: ((...args: any[]) => void)): EventEmitter
  • Parameters

    • sigName: "notify::flags"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns EventEmitter

  • Parameters

    • sigName: string
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns EventEmitter

  • on(sigName: "notify::flags", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • on(sigName: string, callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • Parameters

    • sigName: "notify::flags"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: string
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • once(sigName: "notify::flags", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • once(sigName: string, callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • Parameters

    • sigName: "notify::flags"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: string
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Increases the reference count of object.

    Since GLib 2.56, if GLIB_VERSION_MAX_ALLOWED is 2.56 or greater, the type of object will be propagated to the return type (using the GCC typeof() extension), so any casting the caller needs to do on the return type must be explicit.

    Returns GObject.Object

  • Increase the reference count of object, and possibly remove the [floating][floating-ref] reference, if object has a floating reference.

    In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.

    Since GLib 2.56, the type of object will be propagated to the return type under the same conditions as for g_object_ref().

    Returns GObject.Object

  • runDispose(): void
  • Releases all references to other objects. This can be used to break reference cycles.

    This function should only be called from object system implementations.

    Returns void

  • setData(key: string, data?: object): void
  • Each object carries around a table of associations from strings to pointers. This function lets you set an association.

    If the object already had an association with that name, the old association will be destroyed.

    Internally, the key is converted to a #GQuark using g_quark_from_string(). This means a copy of key is kept permanently (even after object has been finalized) — so it is recommended to only use a small, bounded set of values for key in your program, to avoid the #GQuark storage growing unbounded.

    Parameters

    • key: string

      name of the key

    • Optional data: object

      data to associate with that key

    Returns void

  • setProperty(propertyName: string, value?: any): void
  • Sets a property on an object.

    Parameters

    • propertyName: string

      the name of the property to set

    • Optional value: any

      the value

    Returns void

  • stealData(key?: string): object
  • Remove a specified datum from the object's data associations, without invoking the association's destroy handler.

    Parameters

    • Optional key: string

      name of the key

    Returns object

  • stealQdata(quark: number): object
  • This function gets back user data pointers stored via g_object_set_qdata() and removes the data from object without invoking its destroy() function (if any was set). Usually, calling this function is only required to update user data pointers with a destroy notifier, for example:

    void
    object_add_to_user_list (GObject *object,
    const gchar *new_string)
    {
    // the quark, naming the object data
    GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
    // retrieve the old string list
    GList *list = g_object_steal_qdata (object, quark_string_list);

    // prepend new string
    list = g_list_prepend (list, g_strdup (new_string));
    // this changed 'list', so we need to set it again
    g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
    }
    static void
    free_string_list (gpointer data)
    {
    GList *node, *list = data;

    for (node = list; node; node = node->next)
    g_free (node->data);
    g_list_free (list);
    }

    Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().

    Parameters

    • quark: number

      A #GQuark, naming the user data pointer

    Returns object

  • stop(): void
  • Stop the session bus started by g_test_dbus_up().

    Unlike g_test_dbus_down(), this won't verify the #GDBusConnection singleton returned by g_bus_get() or g_bus_get_sync() is destroyed. Unit tests wanting to verify behaviour after the session bus has been stopped can use this function but should still call g_test_dbus_down() when done.

    Returns void

  • thawNotify(): void
  • Reverts the effect of a previous call to g_object_freeze_notify(). The freeze count is decreased on object and when it reaches zero, queued "notify" signals are emitted.

    Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.

    It is an error to call this function when the freeze count is zero.

    Returns void

  • unref(): void
  • Decreases the reference count of object. When its reference count drops to 0, the object is finalized (i.e. its memory is freed).

    If the pointer to the #GObject may be reused in future (for example, if it is an instance variable of another object), it is recommended to clear the pointer to %NULL rather than retain a dangling pointer to a potentially invalid #GObject instance. Use g_clear_object() for this.

    Returns void

  • up(): void
  • Start a dbus-daemon instance and set DBUS_SESSION_BUS_ADDRESS. After this call, it is safe for unit tests to start sending messages on the session bus.

    If this function is called from setup callback of g_test_add(), g_test_dbus_down() must be called in its teardown callback.

    If this function is called from unit test's main(), then g_test_dbus_down() must be called after g_test_run().

    Returns void

  • watchClosure(closure: TClosure<any, any>): void
  • This function essentially limits the life time of the closure to the life time of the object. That is, when the object is finalized, the closure is invalidated by calling g_closure_invalidate() on it, in order to prevent invocations of the closure with a finalized (nonexisting) object. Also, g_object_ref() and g_object_unref() are added as marshal guards to the closure, to ensure that an extra reference count is held on object during invocation of the closure. Usually, this function will be called on closures that use this object as closure data.

    Parameters

    • closure: TClosure<any, any>

      #GClosure to watch

    Returns void

  • compatControl(what: number, data: object): number
  • Find the #GParamSpec with the given name for an interface. Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek().

    Parameters

    • gIface: TypeInterface

      any interface vtable for the interface, or the default vtable for the interface

    • propertyName: string

      name of a property to look up.

    Returns ParamSpec

  • Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created #GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.

    This function is meant to be called from the interface's default vtable initialization function (the class_init member of #GTypeInfo.) It must not be called after after class_init has been called for any object types implementing this interface.

    If pspec is a floating reference, it will be consumed.

    Parameters

    • gIface: TypeInterface

      any interface vtable for the interface, or the default vtable for the interface.

    • pspec: ParamSpec

      the #GParamSpec for the new property

    Returns void

  • Lists the properties of an interface.Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek().

    Parameters

    • gIface: TypeInterface

      any interface vtable for the interface, or the default vtable for the interface

    Returns ParamSpec[]

  • Creates a new instance of a #GObject subtype and sets its properties.

    Construction parameters (see %G_PARAM_CONSTRUCT, %G_PARAM_CONSTRUCT_ONLY) which are not explicitly specified are set to their default values.

    Parameters

    • objectType: GType<unknown>

      the type id of the #GObject subtype to instantiate

    • parameters: GObject.Parameter[]

      an array of #GParameter

    Returns GObject.Object

  • unset(): void
  • Unset DISPLAY and DBUS_SESSION_BUS_ADDRESS env variables to ensure the test won't use user's session bus.

    This is useful for unit tests that want to verify behaviour when no session bus is running. It is not necessary to call this if unit test already calls g_test_dbus_up() before acquiring the session bus.

    Returns void

Legend

  • Module
  • Object literal
  • Variable
  • Function
  • Function with type parameter
  • Index signature
  • Type alias
  • Type alias with type parameter
  • Enumeration
  • Enumeration member
  • Property
  • Method
  • Interface
  • Interface with type parameter
  • Constructor
  • Property
  • Method
  • Index signature
  • Class
  • Class with type parameter
  • Constructor
  • Property
  • Method
  • Accessor
  • Index signature
  • Inherited constructor
  • Inherited property
  • Inherited method
  • Inherited accessor
  • Protected property
  • Protected method
  • Protected accessor
  • Private property
  • Private method
  • Private accessor
  • Static property
  • Static method