Gjsify LogoGjsify Logo

Hierarchy

Index

Constructors

Properties

closed: number
exposureGcs: Gdk.GC[]
fontOptions: FontOptions
gTypeInstance: TypeInstance
normalGcs: Gdk.GC[]
parentInstance: GObject.Object
resolution: number
subwindowGcs: Gdk.GC[]
$gtype: GType<Gdk.Screen>
name: string

Methods

  • Creates a binding between source_property on source and target_property on target.

    Whenever the source_property is changed the target_property is updated using the same value. For instance:

      g_object_bind_property (action, "active", widget, "sensitive", 0);
    

    Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.

    If flags contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual: if target_property on target changes then the source_property on source will be updated as well.

    The binding will automatically be removed when either the source or the target instances are finalized. To remove the binding without affecting the source and the target you can just call g_object_unref() on the returned #GBinding instance.

    Removing the binding by calling g_object_unref() on it must only be done if the binding, source and target are only used from a single thread and it is clear that both source and target outlive the binding. Especially it is not safe to rely on this if the binding, source or target can be finalized from different threads. Keep another reference to the binding and use g_binding_unbind() instead to be on the safe side.

    A #GObject can have multiple bindings.

    Parameters

    • sourceProperty: string

      the property on source to bind

    • target: GObject.Object

      the target #GObject

    • targetProperty: string

      the property on target to bind

    • flags: BindingFlags

      flags to pass to #GBinding

    Returns Binding

  • Creates a binding between source_property on source and target_property on target, allowing you to set the transformation functions to be used by the binding.

    This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.

    Parameters

    • sourceProperty: string

      the property on source to bind

    • target: GObject.Object

      the target #GObject

    • targetProperty: string

      the property on target to bind

    • flags: BindingFlags

      flags to pass to #GBinding

    • transformTo: TClosure<any, any>

      a #GClosure wrapping the transformation function from the source to the target, or %NULL to use the default

    • transformFrom: TClosure<any, any>

      a #GClosure wrapping the transformation function from the target to the source, or %NULL to use the default

    Returns Binding

  • broadcastClientMessage(event: Gdk.Event): void
  • emit(sigName: "composited-changed", ...args: any[]): void
  • emit(sigName: "monitors-changed", ...args: any[]): void
  • emit(sigName: "size-changed", ...args: any[]): void
  • emit(sigName: string, ...args: any[]): void
  • forceFloating(): void
  • This function is intended for #GObject implementations to re-enforce a [floating][floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink().

    Returns void

  • freezeNotify(): void
  • Increases the freeze count on object. If the freeze count is non-zero, the emission of "notify" signals on object is stopped. The signals are queued until the freeze count is decreased to zero. Duplicate notifications are squashed so that at most one #GObject::notify signal is emitted for each property modified while the object is frozen.

    This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.

    Returns void

  • getData(key?: string): object
  • Gets a named field from the objects table of associations (see g_object_set_data()).

    Parameters

    • Optional key: string

      name of the key for that association

    Returns object

  • getHeight(): number
  • getHeightMm(): number
  • Returns the height of screen in millimeters. Note that on some X servers this value will not be correct.

    Returns number

  • getMonitorAtPoint(x: number, y: number): number
  • Returns the monitor number in which the point (x,``y) is located.

    Parameters

    • x: number

      the x coordinate in the virtual screen.

    • y: number

      the y coordinate in the virtual screen.

    Returns number

  • getMonitorAtWindow(window: Gdk.Window): number
  • Returns the number of the monitor in which the largest area of the bounding rectangle of window resides.

    Parameters

    Returns number

  • getMonitorGeometry(monitorNum: number, dest: Gdk.Rectangle): void
  • Retrieves the #GdkRectangle representing the size and position of the individual monitor within the entire screen area.

    Note that the size of the entire screen area can be retrieved via gdk_screen_get_width() and gdk_screen_get_height().

    Parameters

    • monitorNum: number

      the monitor number, between 0 and gdk_screen_get_n_monitors (screen)

    • dest: Gdk.Rectangle

      a #GdkRectangle to be filled with the monitor geometry

    Returns void

  • getMonitorHeightMm(monitorNum: number): number
  • Gets the height in millimeters of the specified monitor.

    Parameters

    • monitorNum: number

      number of the monitor, between 0 and gdk_screen_get_n_monitors (screen)

    Returns number

  • getMonitorPlugName(monitorNum: number): string
  • Returns the output name of the specified monitor. Usually something like VGA, DVI, or TV, not the actual product name of the display device.

    Parameters

    • monitorNum: number

      number of the monitor, between 0 and gdk_screen_get_n_monitors (screen)

    Returns string

  • getMonitorWidthMm(monitorNum: number): number
  • Gets the width in millimeters of the specified monitor, if available.

    Parameters

    • monitorNum: number

      number of the monitor, between 0 and gdk_screen_get_n_monitors (screen)

    Returns number

  • getNMonitors(): number
  • Returns the number of monitors which screen consists of.

    Returns number

  • getNumber(): number
  • Gets the index of screen among the screens in the display to which it belongs. (See gdk_screen_get_display())

    Returns number

  • getPrimaryMonitor(): number
  • Gets the primary monitor for screen. The primary monitor is considered the monitor where the 'main desktop' lives. While normal application windows typically allow the window manager to place the windows, specialized desktop applications such as panels should place themselves on the primary monitor.

    If no primary monitor is configured by the user, the return value will be 0, defaulting to the first monitor.

    Returns number

  • getProperty(propertyName?: string, value?: any): void
  • Gets a property of an object.

    The value can be:

    • an empty #GValue initialized by %G_VALUE_INIT, which will be automatically initialized with the expected type of the property (since GLib 2.60)
    • a #GValue initialized with the expected type of the property
    • a #GValue initialized with a type to which the expected type of the property can be transformed

    In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().

    Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.

    Parameters

    • Optional propertyName: string

      the name of the property to get

    • Optional value: any

      return location for the property value

    Returns void

  • getQdata(quark: number): object
  • This function gets back user data pointers stored via g_object_set_qdata().

    Parameters

    • quark: number

      A #GQuark, naming the user data pointer

    Returns object

  • getResolution(): number
  • Gets the resolution for font handling on the screen; see gdk_screen_set_resolution() for full details.

    Returns number

  • Gets the preferred colormap for rendering image data on screen. Not a very useful function; historically, GDK could only render RGB image data to one colormap and visual, but in the current version it can render to any colormap and visual. So there's no need to call this function.

    Returns Gdk.Colormap

  • Gets a "preferred visual" chosen by GdkRGB for rendering image data on screen. In previous versions of GDK, this was the only visual GdkRGB could use for rendering. In current versions, it's simply the visual GdkRGB would have chosen as the optimal one in those previous versions. GdkRGB can now render to drawables with any visual.

    Returns Gdk.Visual

  • Gets a colormap to use for creating windows or pixmaps with an alpha channel. The windowing system on which GTK+ is running may not support this capability, in which case %NULL will be returned. Even if a non-%NULL value is returned, its possible that the window's alpha channel won't be honored when displaying the window on the screen: in particular, for X an appropriate windowing manager and compositing manager must be running to provide appropriate display.

    This functionality is not implemented in the Windows backend.

    For setting an overall opacity for a top-level window, see gdk_window_set_opacity().

    Returns Gdk.Colormap

  • Gets a visual to use for creating windows or pixmaps with an alpha channel. See the docs for gdk_screen_get_rgba_colormap() for caveats.

    Returns Gdk.Visual

  • getSetting(name: string, value: any): boolean
  • Get the system's default visual for screen. This is the visual for the root window of the display. The return value should not be freed.

    Returns Gdk.Visual

  • Obtains a list of all toplevel windows known to GDK on the screen screen. A toplevel window is a child of the root window (see gdk_get_default_root_window()).

    The returned list should be freed with g_list_free(), but its elements need not be freed.

    Returns Gdk.Window[]

  • getWidth(): number
  • getWidthMm(): number
  • Gets the width of screen in millimeters. Note that on some X servers this value will not be correct.

    Returns number

  • Returns a #GList of #GdkWindows representing the current window stack.

    On X11, this is done by inspecting the _NET_CLIENT_LIST_STACKING property on the root window, as described in the Extended Window Manager Hints. If the window manager does not support the _NET_CLIENT_LIST_STACKING hint, this function returns %NULL.

    On other platforms, this function may return %NULL, depending on whether it is implementable on that platform.

    The returned list is newly allocated and owns references to the windows it contains, so it should be freed using g_list_free() and its windows unrefed using g_object_unref() when no longer needed.

    Returns Gdk.Window[]

  • getv(names: string[], values: any[]): void
  • Gets n_properties properties for an object. Obtained properties will be set to values. All properties must be valid. Warnings will be emitted and undefined behaviour may result if invalid properties are passed in.

    Parameters

    • names: string[]

      the names of each property to get

    • values: any[]

      the values of each property to get

    Returns void

  • isComposited(): boolean
  • Returns whether windows with an RGBA visual can reasonably be expected to have their alpha channel drawn correctly on the screen.

    On X11 this function returns whether a compositing manager is compositing screen.

    Returns boolean

  • isFloating(): boolean
  • Lists the available visuals for the specified screen. A visual describes a hardware image data format. For example, a visual might support 24-bit color, or 8-bit color, and might expect pixels to be in a certain format.

    Call g_list_free() on the return value when you're finished with it.

    Returns Gdk.Visual[]

  • makeDisplayName(): string
  • Determines the name to pass to gdk_display_open() to get a #GdkDisplay with this screen as the default screen.

    Returns string

  • notify(propertyName: string): void
  • Emits a "notify" signal for the property property_name on object.

    When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.

    Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.

    Parameters

    • propertyName: string

      the name of a property installed on the class of object.

    Returns void

  • Emits a "notify" signal for the property specified by pspec on object.

    This function omits the property name lookup, hence it is faster than g_object_notify().

    One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:

      enum
    {
    PROP_0,
    PROP_FOO,
    PROP_LAST
    };

    static GParamSpec *properties[PROP_LAST];

    static void
    my_object_class_init (MyObjectClass *klass)
    {
    properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
    0, 100,
    50,
    G_PARAM_READWRITE);
    g_object_class_install_property (gobject_class,
    PROP_FOO,
    properties[PROP_FOO]);
    }

    and then notify a change on the "foo" property with:

      g_object_notify_by_pspec (self, properties[PROP_FOO]);
    

    Parameters

    • pspec: ParamSpec

      the #GParamSpec of a property installed on the class of object.

    Returns void

  • Increases the reference count of object.

    Since GLib 2.56, if GLIB_VERSION_MAX_ALLOWED is 2.56 or greater, the type of object will be propagated to the return type (using the GCC typeof() extension), so any casting the caller needs to do on the return type must be explicit.

    Returns GObject.Object

  • Increase the reference count of object, and possibly remove the [floating][floating-ref] reference, if object has a floating reference.

    In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.

    Since GLib 2.56, the type of object will be propagated to the return type under the same conditions as for g_object_ref().

    Returns GObject.Object

  • runDispose(): void
  • Releases all references to other objects. This can be used to break reference cycles.

    This function should only be called from object system implementations.

    Returns void

  • setData(key: string, data?: object): void
  • Each object carries around a table of associations from strings to pointers. This function lets you set an association.

    If the object already had an association with that name, the old association will be destroyed.

    Internally, the key is converted to a #GQuark using g_quark_from_string(). This means a copy of key is kept permanently (even after object has been finalized) — so it is recommended to only use a small, bounded set of values for key in your program, to avoid the #GQuark storage growing unbounded.

    Parameters

    • key: string

      name of the key

    • Optional data: object

      data to associate with that key

    Returns void

  • Sets the default font options for the screen. These options will be set on any #PangoContext's newly created with gdk_pango_context_get_for_screen(). Changing the default set of font options does not affect contexts that have already been created.

    Parameters

    • options: FontOptions

      a #cairo_font_options_t, or %NULL to unset any previously set default font options.

    Returns void

  • setProperty(propertyName: string, value?: any): void
  • Sets a property on an object.

    Parameters

    • propertyName: string

      the name of the property to set

    • Optional value: any

      the value

    Returns void

  • setResolution(dpi: number): void
  • Sets the resolution for font handling on the screen. This is a scale factor between points specified in a #PangoFontDescription and cairo units. The default value is 96, meaning that a 10 point font will be 13 units high. (10 * 96. / 72. = 13.3).

    Parameters

    • dpi: number

      the resolution in "dots per inch". (Physical inches aren't actually involved; the terminology is conventional.)

    Returns void

  • stealData(key?: string): object
  • Remove a specified datum from the object's data associations, without invoking the association's destroy handler.

    Parameters

    • Optional key: string

      name of the key

    Returns object

  • stealQdata(quark: number): object
  • This function gets back user data pointers stored via g_object_set_qdata() and removes the data from object without invoking its destroy() function (if any was set). Usually, calling this function is only required to update user data pointers with a destroy notifier, for example:

    void
    object_add_to_user_list (GObject *object,
    const gchar *new_string)
    {
    // the quark, naming the object data
    GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
    // retrieve the old string list
    GList *list = g_object_steal_qdata (object, quark_string_list);

    // prepend new string
    list = g_list_prepend (list, g_strdup (new_string));
    // this changed 'list', so we need to set it again
    g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
    }
    static void
    free_string_list (gpointer data)
    {
    GList *node, *list = data;

    for (node = list; node; node = node->next)
    g_free (node->data);
    g_list_free (list);
    }

    Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().

    Parameters

    • quark: number

      A #GQuark, naming the user data pointer

    Returns object

  • thawNotify(): void
  • Reverts the effect of a previous call to g_object_freeze_notify(). The freeze count is decreased on object and when it reaches zero, queued "notify" signals are emitted.

    Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.

    It is an error to call this function when the freeze count is zero.

    Returns void

  • unref(): void
  • Decreases the reference count of object. When its reference count drops to 0, the object is finalized (i.e. its memory is freed).

    If the pointer to the #GObject may be reused in future (for example, if it is an instance variable of another object), it is recommended to clear the pointer to %NULL rather than retain a dangling pointer to a potentially invalid #GObject instance. Use g_clear_object() for this.

    Returns void

  • watchClosure(closure: TClosure<any, any>): void
  • This function essentially limits the life time of the closure to the life time of the object. That is, when the object is finalized, the closure is invalidated by calling g_closure_invalidate() on it, in order to prevent invocations of the closure with a finalized (nonexisting) object. Also, g_object_ref() and g_object_unref() are added as marshal guards to the closure, to ensure that an extra reference count is held on object during invocation of the closure. Usually, this function will be called on closures that use this object as closure data.

    Parameters

    • closure: TClosure<any, any>

      #GClosure to watch

    Returns void

  • compatControl(what: number, data: object): number
  • Gets the default screen for the default display. (See gdk_display_get_default ()).

    Returns Gdk.Screen

  • height(): number
  • Returns the height of the default screen in pixels.

    Returns number

  • heightMm(): number
  • Returns the height of the default screen in millimeters. Note that on many X servers this value will not be correct.

    Returns number

  • Find the #GParamSpec with the given name for an interface. Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek().

    Parameters

    • gIface: TypeInterface

      any interface vtable for the interface, or the default vtable for the interface

    • propertyName: string

      name of a property to look up.

    Returns ParamSpec

  • Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created #GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.

    This function is meant to be called from the interface's default vtable initialization function (the class_init member of #GTypeInfo.) It must not be called after after class_init has been called for any object types implementing this interface.

    If pspec is a floating reference, it will be consumed.

    Parameters

    • gIface: TypeInterface

      any interface vtable for the interface, or the default vtable for the interface.

    • pspec: ParamSpec

      the #GParamSpec for the new property

    Returns void

  • Lists the properties of an interface.Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek().

    Parameters

    • gIface: TypeInterface

      any interface vtable for the interface, or the default vtable for the interface

    Returns ParamSpec[]

  • Creates a new instance of a #GObject subtype and sets its properties.

    Construction parameters (see %G_PARAM_CONSTRUCT, %G_PARAM_CONSTRUCT_ONLY) which are not explicitly specified are set to their default values.

    Parameters

    • objectType: GType<unknown>

      the type id of the #GObject subtype to instantiate

    • parameters: GObject.Parameter[]

      an array of #GParameter

    Returns GObject.Object

  • width(): number
  • Returns the width of the default screen in pixels.

    Returns number

  • widthMm(): number
  • Returns the width of the default screen in millimeters. Note that on many X servers this value will not be correct.

    Returns number

Legend

  • Module
  • Object literal
  • Variable
  • Function
  • Function with type parameter
  • Index signature
  • Type alias
  • Type alias with type parameter
  • Enumeration
  • Enumeration member
  • Property
  • Method
  • Interface
  • Interface with type parameter
  • Constructor
  • Property
  • Method
  • Index signature
  • Class
  • Class with type parameter
  • Constructor
  • Property
  • Method
  • Accessor
  • Index signature
  • Inherited constructor
  • Inherited property
  • Inherited method
  • Inherited accessor
  • Protected property
  • Protected method
  • Protected accessor
  • Private property
  • Private method
  • Private accessor
  • Static property
  • Static method