Gjsify LogoGjsify Logo

A [ifacePrompt] implementation which calls to the system prompter to display prompts in a system modal fashion.

Since the system prompter usually only displays one prompt at a time, you may have to wait for the prompt to be displayed. Use [funcSystemPrompt.open] or a related function to open a prompt. Since this can take a long time, you should always check that the prompt is still needed after it is opened. A previous prompt may have already provided the information needed and you may no longer need to prompt.

Use [methodSystemPrompt.close] to close the prompt when you're done with it.

Hierarchy

Index

Constructors

Properties

busName: string

The DBus bus name of the prompter to use for prompting, or %NULL for the default prompter.

callerWindow: string

The string handle of the caller's window.

The caller window indicates to the prompt which window is prompting the user. The prompt may choose to ignore this information or use it in whatever way it sees fit.

In X11, this will be a stringified version of the XWindow handle; in Wayland this is the result of an export using the XDG foreign protocol.

cancelLabel: string

The label for the cancel button in the prompt.

choiceChosen: boolean

Whether the additional choice is chosen or not.

The additional choice would have been setup using #GcrPrompt:choice-label.

choiceLabel: string

The label for the additional choice.

If this is a non-%NULL value then an additional boolean choice will be displayed by the prompt allowing the user to select or deselect it.

If %NULL, then no additional choice is displayed.

The initial value of the choice can be set with #GcrPrompt:choice-chosen.

continueLabel: string

The label for the continue button in the prompt.

description: string

The detailed description of the prompt.

A prompt implementation may choose not to display this detailed description. The prompt message should contain relevant information.

gTypeInstance: TypeInstance
message: string

The prompt message for the user.

A prompt implementation should always display this message.

parent: GObject.Object
passwordNew: boolean

Whether the prompt will prompt for a new password.

This will cause the prompt implementation to ask the user to confirm the password and/or display other relevant user interface for creating a new password.

passwordStrength: number

Indication of the password strength.

Prompts will return a zero value if the password is empty, and a value greater than zero if the password has any characters.

This is only valid after a successful prompt for a password.

secretExchange: SecretExchange

The #GcrSecretExchange to use when transferring passwords. A default secret exchange will be used if this is not set.

timeoutSeconds: number

The timeout in seconds to wait when opening the prompt.

title: string

The title of the prompt.

A prompt implementation may choose not to display the prompt title. The #GcrPrompt:message should contain relevant information.

warning: string

A prompt warning displayed on the prompt, or %NULL for no warning.

This is a warning like "The password is incorrect." usually displayed to the user about a previous 'unsuccessful' prompt.

name: string

Methods

  • Creates a binding between source_property on source and target_property on target.

    Whenever the source_property is changed the target_property is updated using the same value. For instance:

      g_object_bind_property (action, "active", widget, "sensitive", 0);
    

    Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.

    If flags contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual: if target_property on target changes then the source_property on source will be updated as well.

    The binding will automatically be removed when either the source or the target instances are finalized. To remove the binding without affecting the source and the target you can just call g_object_unref() on the returned #GBinding instance.

    Removing the binding by calling g_object_unref() on it must only be done if the binding, source and target are only used from a single thread and it is clear that both source and target outlive the binding. Especially it is not safe to rely on this if the binding, source or target can be finalized from different threads. Keep another reference to the binding and use g_binding_unbind() instead to be on the safe side.

    A #GObject can have multiple bindings.

    Parameters

    • sourceProperty: string

      the property on source to bind

    • target: GObject.Object

      the target #GObject

    • targetProperty: string

      the property on target to bind

    • flags: BindingFlags

      flags to pass to #GBinding

    Returns Binding

  • Creates a binding between source_property on source and target_property on target, allowing you to set the transformation functions to be used by the binding.

    This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.

    Parameters

    • sourceProperty: string

      the property on source to bind

    • target: GObject.Object

      the target #GObject

    • targetProperty: string

      the property on target to bind

    • flags: BindingFlags

      flags to pass to #GBinding

    • transformTo: TClosure<any, any>

      a #GClosure wrapping the transformation function from the source to the target, or %NULL to use the default

    • transformFrom: TClosure<any, any>

      a #GClosure wrapping the transformation function from the target to the source, or %NULL to use the default

    Returns Binding

  • close(cancellable?: Gio.Cancellable): boolean
  • close(): void
  • close(...args: any[]): any
  • close(...args: any[]): any
  • Close this prompt. After calling this function, no further prompts will succeed on this object. The prompt object is not unreferenced by this function, and you must unreference it once done.

    This call may block, use the gcr_system_prompt_close_async() to perform this action indefinitely.

    Whether or not this function returns %TRUE, the system prompt object is still closed and may not be further used.

    Parameters

    • Optional cancellable: Gio.Cancellable

      an optional cancellation object

    Returns boolean

  • Closes the prompt so that in can no longer be used to prompt. The various prompt methods will return results as if the user dismissed the prompt.

    The prompt may also be closed by the implementor of the prompt object.

    This emits the [signalPrompt::prompt-close] signal on the prompt object.

    Returns void

  • Parameters

    • Rest ...args: any[]

    Returns any

  • Parameters

    • Rest ...args: any[]

    Returns any

  • Close this prompt asynchronously. After calling this function, no further methods may be called on this object. The prompt object is not unreferenced by this function, and you must unreference it once done.

    This call returns immediately and completes asynchronously.

    Parameters

    Returns void

  • Complete operation to close this prompt.

    Whether or not this function returns %TRUE, the system prompt object is still closed and may not be further used.

    Parameters

    Returns boolean

  • Prompts for confirmation asking a cancel/continue style question. Set the various properties on the prompt before calling this function to represent the question correctly.

    This method will block until the a response is returned from the prompter.

    %GCR_PROMPT_REPLY_CONTINUE will be returned if the user confirms the prompt. The return value will also be %GCR_PROMPT_REPLY_CANCEL if the user cancels or if an error occurs. Check the error argument to tell the difference.

    Parameters

    Returns PromptReply

  • Prompts for confirmation asking a cancel/continue style question. Set the various properties on the prompt before calling this method to represent the question correctly.

    This method will return immediately and complete asynchronously.

    Parameters

    Returns void

  • Complete an operation to prompt for confirmation.

    %GCR_PROMPT_REPLY_CONTINUE will be returned if the user confirms the prompt. The return value will also be %GCR_PROMPT_REPLY_CANCEL if the user cancels or if an error occurs. Check the error argument to tell the difference.

    Parameters

    • result: AsyncResult

      asynchronous result passed to callback

    Returns PromptReply

  • Prompts for confirmation asking a cancel/continue style question. Set the various properties on the prompt before calling this function to represent the question correctly.

    This method will block until the a response is returned from the prompter and will run a main loop similar to a gtk_dialog_run(). The application will remain responsive but care must be taken to handle reentrancy issues.

    %GCR_PROMPT_REPLY_CONTINUE will be returned if the user confirms the prompt. The return value will also be %GCR_PROMPT_REPLY_CANCEL if the user cancels or if an error occurs. Check the error argument to tell the difference.

    Parameters

    Returns PromptReply

  • connect(sigName: "notify::bus-name", callback: ((...args: any[]) => void)): number
  • connect(sigName: "notify::secret-exchange", callback: ((...args: any[]) => void)): number
  • connect(sigName: "notify::timeout-seconds", callback: ((...args: any[]) => void)): number
  • connect(sigName: "notify::caller-window", callback: ((...args: any[]) => void)): number
  • connect(sigName: "notify::cancel-label", callback: ((...args: any[]) => void)): number
  • connect(sigName: "notify::choice-chosen", callback: ((...args: any[]) => void)): number
  • connect(sigName: "notify::choice-label", callback: ((...args: any[]) => void)): number
  • connect(sigName: "notify::continue-label", callback: ((...args: any[]) => void)): number
  • connect(sigName: "notify::description", callback: ((...args: any[]) => void)): number
  • connect(sigName: "notify::message", callback: ((...args: any[]) => void)): number
  • connect(sigName: "notify::password-new", callback: ((...args: any[]) => void)): number
  • connect(sigName: "notify::password-strength", callback: ((...args: any[]) => void)): number
  • connect(sigName: "notify::title", callback: ((...args: any[]) => void)): number
  • connect(sigName: "notify::warning", callback: ((...args: any[]) => void)): number
  • connect(sigName: string, callback: ((...args: any[]) => void)): number
  • Parameters

    • sigName: "notify::bus-name"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns number

  • Parameters

    • sigName: "notify::secret-exchange"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns number

  • Parameters

    • sigName: "notify::timeout-seconds"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns number

  • Parameters

    • sigName: "notify::caller-window"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns number

  • Parameters

    • sigName: "notify::cancel-label"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns number

  • Parameters

    • sigName: "notify::choice-chosen"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns number

  • Parameters

    • sigName: "notify::choice-label"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns number

  • Parameters

    • sigName: "notify::continue-label"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns number

  • Parameters

    • sigName: "notify::description"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns number

  • Parameters

    • sigName: "notify::message"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns number

  • Parameters

    • sigName: "notify::password-new"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns number

  • Parameters

    • sigName: "notify::password-strength"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns number

  • Parameters

    • sigName: "notify::title"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns number

  • Parameters

    • sigName: "notify::warning"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns number

  • Parameters

    • sigName: string
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns number

  • emit(sigName: "notify::bus-name", ...args: any[]): void
  • emit(sigName: "notify::secret-exchange", ...args: any[]): void
  • emit(sigName: "notify::timeout-seconds", ...args: any[]): void
  • emit(sigName: "notify::caller-window", ...args: any[]): void
  • emit(sigName: "notify::cancel-label", ...args: any[]): void
  • emit(sigName: "notify::choice-chosen", ...args: any[]): void
  • emit(sigName: "notify::choice-label", ...args: any[]): void
  • emit(sigName: "notify::continue-label", ...args: any[]): void
  • emit(sigName: "notify::description", ...args: any[]): void
  • emit(sigName: "notify::message", ...args: any[]): void
  • emit(sigName: "notify::password-new", ...args: any[]): void
  • emit(sigName: "notify::password-strength", ...args: any[]): void
  • emit(sigName: "notify::title", ...args: any[]): void
  • emit(sigName: "notify::warning", ...args: any[]): void
  • emit(sigName: string, ...args: any[]): void
  • forceFloating(): void
  • This function is intended for #GObject implementations to re-enforce a [floating][floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink().

    Returns void

  • freezeNotify(): void
  • Increases the freeze count on object. If the freeze count is non-zero, the emission of "notify" signals on object is stopped. The signals are queued until the freeze count is decreased to zero. Duplicate notifications are squashed so that at most one #GObject::notify signal is emitted for each property modified while the object is frozen.

    This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.

    Returns void

  • getCallerWindow(): string
  • Get the string handle of the caller's window.

    The caller window indicates to the prompt which window is prompting the user. The prompt may choose to ignore this information or use it in whatever way it sees fit.

    Returns string

  • getCancelLabel(): string
  • Get the label for the cancel button.

    This is the button that results in a %GCR_PROMPT_REPLY_CANCEL reply from the prompt.

    Returns string

  • getChoiceChosen(): boolean
  • Get whether the additional choice was chosen or not.

    The additional choice would have been setup using gcr_prompt_set_choice_label().

    Returns boolean

  • getChoiceLabel(): string
  • Get the label for the additional choice.

    This will be %NULL if no additional choice is being displayed.

    Returns string

  • getContinueLabel(): string
  • Get the label for the continue button.

    This is the button that results in a %GCR_PROMPT_REPLY_CONTINUE reply from the prompt.

    Returns string

  • getData(key?: string): object
  • Gets a named field from the objects table of associations (see g_object_set_data()).

    Parameters

    • Optional key: string

      name of the key for that association

    Returns object

  • getDescription(): string
  • Get the detailed description of the prompt.

    A prompt implementation may choose not to display this detailed description. The prompt message should contain relevant information.

    Returns string

  • getMessage(): string
  • Gets the prompt message for the user.

    A prompt implementation should always display this message.

    Returns string

  • getPasswordNew(): boolean
  • Get whether the prompt will prompt for a new password.

    This will cause the prompt implementation to ask the user to confirm the password and/or display other relevant user interface for creating a new password.

    Returns boolean

  • getPasswordStrength(): number
  • Get indication of the password strength.

    Prompts will return a zero value if the password is empty, and a value greater than zero if the password has any characters.

    This is only valid after a successful prompt for a password.

    Returns number

  • getProperty(propertyName?: string, value?: any): void
  • Gets a property of an object.

    The value can be:

    • an empty #GValue initialized by %G_VALUE_INIT, which will be automatically initialized with the expected type of the property (since GLib 2.60)
    • a #GValue initialized with the expected type of the property
    • a #GValue initialized with a type to which the expected type of the property can be transformed

    In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().

    Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.

    Parameters

    • Optional propertyName: string

      the name of the property to get

    • Optional value: any

      return location for the property value

    Returns void

  • getQdata(quark: number): object
  • This function gets back user data pointers stored via g_object_set_qdata().

    Parameters

    • quark: number

      A #GQuark, naming the user data pointer

    Returns object

  • getTitle(): string
  • Gets the title of the prompt.

    A prompt implementation may choose not to display the prompt title. The prompt message should contain relevant information.

    Returns string

  • getWarning(): string
  • Get a prompt warning displayed on the prompt.

    This is a warning like "The password is incorrect." usually displayed to the user about a previous 'unsuccessful' prompt.

    If this string is %NULL then no warning is displayed.

    Returns string

  • getv(names: string[], values: any[]): void
  • Gets n_properties properties for an object. Obtained properties will be set to values. All properties must be valid. Warnings will be emitted and undefined behaviour may result if invalid properties are passed in.

    Parameters

    • names: string[]

      the names of each property to get

    • values: any[]

      the values of each property to get

    Returns void

  • Initializes the object implementing the interface.

    This method is intended for language bindings. If writing in C, g_initable_new() should typically be used instead.

    The object must be initialized before any real use after initial construction, either with this function or g_async_initable_init_async().

    Implementations may also support cancellation. If cancellable is not %NULL, then initialization can be cancelled by triggering the cancellable object from another thread. If the operation was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If cancellable is not %NULL and the object doesn't support cancellable initialization the error %G_IO_ERROR_NOT_SUPPORTED will be returned.

    If the object is not initialized, or initialization returns with an error, then all operations on the object except g_object_ref() and g_object_unref() are considered to be invalid, and have undefined behaviour. See the [introduction][ginitable] for more details.

    Callers should not assume that a class which implements #GInitable can be initialized multiple times, unless the class explicitly documents itself as supporting this. Generally, a class’ implementation of init() can assume (and assert) that it will only be called once. Previously, this documentation recommended all #GInitable implementations should be idempotent; that recommendation was relaxed in GLib 2.54.

    If a class explicitly supports being initialized multiple times, it is recommended that the method is idempotent: multiple calls with the same arguments should return the same results. Only the first call initializes the object; further calls return the result of the first call.

    One reason why a class might need to support idempotent initialization is if it is designed to be used via the singleton pattern, with a #GObjectClass.constructor that sometimes returns an existing instance. In this pattern, a caller would expect to be able to call g_initable_init() on the result of g_object_new(), regardless of whether it is in fact a new instance.

    Parameters

    • Optional cancellable: Gio.Cancellable

      optional #GCancellable object, %NULL to ignore.

    Returns boolean

  • Starts asynchronous initialization of the object implementing the interface. This must be done before any real use of the object after initial construction. If the object also implements #GInitable you can optionally call g_initable_init() instead.

    This method is intended for language bindings. If writing in C, g_async_initable_new_async() should typically be used instead.

    When the initialization is finished, callback will be called. You can then call g_async_initable_init_finish() to get the result of the initialization.

    Implementations may also support cancellation. If cancellable is not %NULL, then initialization can be cancelled by triggering the cancellable object from another thread. If the operation was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If cancellable is not %NULL, and the object doesn't support cancellable initialization, the error %G_IO_ERROR_NOT_SUPPORTED will be returned.

    As with #GInitable, if the object is not initialized, or initialization returns with an error, then all operations on the object except g_object_ref() and g_object_unref() are considered to be invalid, and have undefined behaviour. They will often fail with g_critical() or g_warning(), but this must not be relied on.

    Callers should not assume that a class which implements #GAsyncInitable can be initialized multiple times; for more information, see g_initable_init(). If a class explicitly supports being initialized multiple times, implementation requires yielding all subsequent calls to init_async() on the results of the first call.

    For classes that also support the #GInitable interface, the default implementation of this method will run the g_initable_init() function in a thread, so if you want to support asynchronous initialization via threads, just implement the #GAsyncInitable interface without overriding any interface methods.

    Parameters

    • ioPriority: number

      the [I/O priority][io-priority] of the operation

    • Optional cancellable: Gio.Cancellable

      optional #GCancellable object, %NULL to ignore.

    • Optional callback: AsyncReadyCallback

      a #GAsyncReadyCallback to call when the request is satisfied

    Returns void

  • isFloating(): boolean
  • notify(propertyName: string): void
  • Emits a "notify" signal for the property property_name on object.

    When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.

    Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.

    Parameters

    • propertyName: string

      the name of a property installed on the class of object.

    Returns void

  • Emits a "notify" signal for the property specified by pspec on object.

    This function omits the property name lookup, hence it is faster than g_object_notify().

    One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:

      enum
    {
    PROP_0,
    PROP_FOO,
    PROP_LAST
    };

    static GParamSpec *properties[PROP_LAST];

    static void
    my_object_class_init (MyObjectClass *klass)
    {
    properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
    0, 100,
    50,
    G_PARAM_READWRITE);
    g_object_class_install_property (gobject_class,
    PROP_FOO,
    properties[PROP_FOO]);
    }

    and then notify a change on the "foo" property with:

      g_object_notify_by_pspec (self, properties[PROP_FOO]);
    

    Parameters

    • pspec: ParamSpec

      the #GParamSpec of a property installed on the class of object.

    Returns void

  • off(sigName: "notify::bus-name", callback: ((...args: any[]) => void)): EventEmitter
  • off(sigName: "notify::secret-exchange", callback: ((...args: any[]) => void)): EventEmitter
  • off(sigName: "notify::timeout-seconds", callback: ((...args: any[]) => void)): EventEmitter
  • off(sigName: "notify::caller-window", callback: ((...args: any[]) => void)): EventEmitter
  • off(sigName: "notify::cancel-label", callback: ((...args: any[]) => void)): EventEmitter
  • off(sigName: "notify::choice-chosen", callback: ((...args: any[]) => void)): EventEmitter
  • off(sigName: "notify::choice-label", callback: ((...args: any[]) => void)): EventEmitter
  • off(sigName: "notify::continue-label", callback: ((...args: any[]) => void)): EventEmitter
  • off(sigName: "notify::description", callback: ((...args: any[]) => void)): EventEmitter
  • off(sigName: "notify::message", callback: ((...args: any[]) => void)): EventEmitter
  • off(sigName: "notify::password-new", callback: ((...args: any[]) => void)): EventEmitter
  • off(sigName: "notify::password-strength", callback: ((...args: any[]) => void)): EventEmitter
  • off(sigName: "notify::title", callback: ((...args: any[]) => void)): EventEmitter
  • off(sigName: "notify::warning", callback: ((...args: any[]) => void)): EventEmitter
  • off(sigName: string, callback: ((...args: any[]) => void)): EventEmitter
  • Parameters

    • sigName: "notify::bus-name"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns EventEmitter

  • Parameters

    • sigName: "notify::secret-exchange"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns EventEmitter

  • Parameters

    • sigName: "notify::timeout-seconds"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns EventEmitter

  • Parameters

    • sigName: "notify::caller-window"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns EventEmitter

  • Parameters

    • sigName: "notify::cancel-label"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns EventEmitter

  • Parameters

    • sigName: "notify::choice-chosen"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns EventEmitter

  • Parameters

    • sigName: "notify::choice-label"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns EventEmitter

  • Parameters

    • sigName: "notify::continue-label"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns EventEmitter

  • Parameters

    • sigName: "notify::description"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns EventEmitter

  • Parameters

    • sigName: "notify::message"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns EventEmitter

  • Parameters

    • sigName: "notify::password-new"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns EventEmitter

  • Parameters

    • sigName: "notify::password-strength"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns EventEmitter

  • Parameters

    • sigName: "notify::title"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns EventEmitter

  • Parameters

    • sigName: "notify::warning"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns EventEmitter

  • Parameters

    • sigName: string
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns EventEmitter

  • on(sigName: "notify::bus-name", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • on(sigName: "notify::secret-exchange", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • on(sigName: "notify::timeout-seconds", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • on(sigName: "notify::caller-window", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • on(sigName: "notify::cancel-label", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • on(sigName: "notify::choice-chosen", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • on(sigName: "notify::choice-label", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • on(sigName: "notify::continue-label", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • on(sigName: "notify::description", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • on(sigName: "notify::message", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • on(sigName: "notify::password-new", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • on(sigName: "notify::password-strength", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • on(sigName: "notify::title", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • on(sigName: "notify::warning", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • on(sigName: string, callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • Parameters

    • sigName: "notify::bus-name"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::secret-exchange"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::timeout-seconds"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::caller-window"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::cancel-label"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::choice-chosen"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::choice-label"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::continue-label"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::description"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::message"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::password-new"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::password-strength"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::title"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::warning"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: string
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • once(sigName: "notify::bus-name", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • once(sigName: "notify::secret-exchange", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • once(sigName: "notify::timeout-seconds", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • once(sigName: "notify::caller-window", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • once(sigName: "notify::cancel-label", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • once(sigName: "notify::choice-chosen", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • once(sigName: "notify::choice-label", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • once(sigName: "notify::continue-label", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • once(sigName: "notify::description", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • once(sigName: "notify::message", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • once(sigName: "notify::password-new", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • once(sigName: "notify::password-strength", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • once(sigName: "notify::title", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • once(sigName: "notify::warning", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • once(sigName: string, callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • Parameters

    • sigName: "notify::bus-name"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::secret-exchange"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::timeout-seconds"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::caller-window"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::cancel-label"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::choice-chosen"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::choice-label"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::continue-label"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::description"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::message"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::password-new"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::password-strength"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::title"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::warning"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: string
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Prompts for password. Set the various properties on the prompt before calling this method to explain which password should be entered.

    This method will block until the a response is returned from the prompter.

    A password will be returned if the user enters a password successfully. The returned password is valid until the next time a method is called to display another prompt.

    %NULL will be returned if the user cancels or if an error occurs. Check the error argument to tell the difference.

    Parameters

    Returns string

  • Prompts for password. Set the various properties on the prompt before calling this method to explain which password should be entered.

    This method will return immediately and complete asynchronously.

    Parameters

    Returns void

  • Complete an operation to prompt for a password.

    A password will be returned if the user enters a password successfully. The returned password is valid until the next time a method is called to display another prompt.

    %NULL will be returned if the user cancels or if an error occurs. Check the error argument to tell the difference.

    Parameters

    • result: AsyncResult

      asynchronous result passed to callback

    Returns string

  • Prompts for password. Set the various properties on the prompt before calling this method to explain which password should be entered.

    This method will block until the a response is returned from the prompter and will run a main loop similar to a gtk_dialog_run(). The application will remain responsive but care must be taken to handle reentrancy issues.

    A password will be returned if the user enters a password successfully. The returned password is valid until the next time a method is called to display another prompt.

    %NULL will be returned if the user cancels or if an error occurs. Check the error argument to tell the difference.

    Parameters

    Returns string

  • Increases the reference count of object.

    Since GLib 2.56, if GLIB_VERSION_MAX_ALLOWED is 2.56 or greater, the type of object will be propagated to the return type (using the GCC typeof() extension), so any casting the caller needs to do on the return type must be explicit.

    Returns GObject.Object

  • Increase the reference count of object, and possibly remove the [floating][floating-ref] reference, if object has a floating reference.

    In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.

    Since GLib 2.56, the type of object will be propagated to the return type under the same conditions as for g_object_ref().

    Returns GObject.Object

  • reset(): void
  • runDispose(): void
  • Releases all references to other objects. This can be used to break reference cycles.

    This function should only be called from object system implementations.

    Returns void

  • setCallerWindow(windowId: string): void
  • Set the string handle of the caller's window.

    The caller window indicates to the prompt which window is prompting the user. The prompt may choose to ignore this information or use it in whatever way it sees fit.

    Parameters

    • windowId: string

      the window id

    Returns void

  • setCancelLabel(cancelLabel: string): void
  • Set the label for the continue button.

    This is the button that results in a %GCR_PROMPT_REPLY_CANCEL reply from the prompt.

    Parameters

    • cancelLabel: string

      the label

    Returns void

  • setChoiceChosen(chosen: boolean): void
  • Set whether the additional choice is chosen or not.

    The additional choice should be set up using gcr_prompt_set_choice_label().

    Parameters

    • chosen: boolean

      whether chosen

    Returns void

  • setChoiceLabel(choiceLabel: string): void
  • Set the label for the additional choice.

    If this is a non-%NULL value then an additional boolean choice will be displayed by the prompt allowing the user to select or deselect it.

    The initial value of the choice can be set with the gcr_prompt_set_choice_label() method.

    If this is %NULL, then no additional choice is being displayed.

    Parameters

    • choiceLabel: string

      the additional choice or %NULL

    Returns void

  • setContinueLabel(continueLabel: string): void
  • Set the label for the continue button.

    This is the button that results in a %GCR_PROMPT_REPLY_CONTINUE reply from the prompt.

    Parameters

    • continueLabel: string

      the label

    Returns void

  • setData(key: string, data?: object): void
  • Each object carries around a table of associations from strings to pointers. This function lets you set an association.

    If the object already had an association with that name, the old association will be destroyed.

    Internally, the key is converted to a #GQuark using g_quark_from_string(). This means a copy of key is kept permanently (even after object has been finalized) — so it is recommended to only use a small, bounded set of values for key in your program, to avoid the #GQuark storage growing unbounded.

    Parameters

    • key: string

      name of the key

    • Optional data: object

      data to associate with that key

    Returns void

  • setDescription(description: string): void
  • Set the detailed description of the prompt.

    A prompt implementation may choose not to display this detailed description. Use gcr_prompt_set_message() to set a general message containing relevant information.

    Parameters

    • description: string

      the detailed description

    Returns void

  • setMessage(message: string): void
  • Sets the prompt message for the user.

    A prompt implementation should always display this message.

    Parameters

    • message: string

      the prompt message

    Returns void

  • setPasswordNew(newPassword: boolean): void
  • Set whether the prompt will prompt for a new password.

    This will cause the prompt implementation to ask the user to confirm the password and/or display other relevant user interface for creating a new password.

    Parameters

    • newPassword: boolean

      whether in new password mode or not

    Returns void

  • setProperty(propertyName: string, value?: any): void
  • Sets a property on an object.

    Parameters

    • propertyName: string

      the name of the property to set

    • Optional value: any

      the value

    Returns void

  • setTitle(title: string): void
  • Sets the title of the prompt.

    A prompt implementation may choose not to display the prompt title. The prompt message should contain relevant information.

    Parameters

    • title: string

      the prompt title

    Returns void

  • setWarning(warning: string): void
  • Set a prompt warning displayed on the prompt.

    This is a warning like "The password is incorrect." usually displayed to the user about a previous 'unsuccessful' prompt.

    If this string is %NULL then no warning is displayed.

    Parameters

    • warning: string

      the warning or %NULL

    Returns void

  • stealData(key?: string): object
  • Remove a specified datum from the object's data associations, without invoking the association's destroy handler.

    Parameters

    • Optional key: string

      name of the key

    Returns object

  • stealQdata(quark: number): object
  • This function gets back user data pointers stored via g_object_set_qdata() and removes the data from object without invoking its destroy() function (if any was set). Usually, calling this function is only required to update user data pointers with a destroy notifier, for example:

    void
    object_add_to_user_list (GObject *object,
    const gchar *new_string)
    {
    // the quark, naming the object data
    GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
    // retrieve the old string list
    GList *list = g_object_steal_qdata (object, quark_string_list);

    // prepend new string
    list = g_list_prepend (list, g_strdup (new_string));
    // this changed 'list', so we need to set it again
    g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
    }
    static void
    free_string_list (gpointer data)
    {
    GList *node, *list = data;

    for (node = list; node; node = node->next)
    g_free (node->data);
    g_list_free (list);
    }

    Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().

    Parameters

    • quark: number

      A #GQuark, naming the user data pointer

    Returns object

  • thawNotify(): void
  • Reverts the effect of a previous call to g_object_freeze_notify(). The freeze count is decreased on object and when it reaches zero, queued "notify" signals are emitted.

    Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.

    It is an error to call this function when the freeze count is zero.

    Returns void

  • unref(): void
  • Decreases the reference count of object. When its reference count drops to 0, the object is finalized (i.e. its memory is freed).

    If the pointer to the #GObject may be reused in future (for example, if it is an instance variable of another object), it is recommended to clear the pointer to %NULL rather than retain a dangling pointer to a potentially invalid #GObject instance. Use g_clear_object() for this.

    Returns void

  • watchClosure(closure: TClosure<any, any>): void
  • This function essentially limits the life time of the closure to the life time of the object. That is, when the object is finalized, the closure is invalidated by calling g_closure_invalidate() on it, in order to prevent invocations of the closure with a finalized (nonexisting) object. Also, g_object_ref() and g_object_unref() are added as marshal guards to the closure, to ensure that an extra reference count is held on object during invocation of the closure. Usually, this function will be called on closures that use this object as closure data.

    Parameters

    • closure: TClosure<any, any>

      #GClosure to watch

    Returns void

  • compatControl(what: number, data: object): number
  • errorGetDomain(): number
  • Find the #GParamSpec with the given name for an interface. Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek().

    Parameters

    • gIface: TypeInterface

      any interface vtable for the interface, or the default vtable for the interface

    • propertyName: string

      name of a property to look up.

    Returns ParamSpec

  • Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created #GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.

    This function is meant to be called from the interface's default vtable initialization function (the class_init member of #GTypeInfo.) It must not be called after after class_init has been called for any object types implementing this interface.

    If pspec is a floating reference, it will be consumed.

    Parameters

    • gIface: TypeInterface

      any interface vtable for the interface, or the default vtable for the interface.

    • pspec: ParamSpec

      the #GParamSpec for the new property

    Returns void

  • Lists the properties of an interface.Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek().

    Parameters

    • gIface: TypeInterface

      any interface vtable for the interface, or the default vtable for the interface

    Returns ParamSpec[]

  • Creates a new instance of a #GObject subtype and sets its properties.

    Construction parameters (see %G_PARAM_CONSTRUCT, %G_PARAM_CONSTRUCT_ONLY) which are not explicitly specified are set to their default values.

    Parameters

    • objectType: GType<unknown>

      the type id of the #GObject subtype to instantiate

    • parameters: GObject.Parameter[]

      an array of #GParameter

    Returns GObject.Object

  • Opens a system prompt with the default prompter.

    Most system prompters only allow showing one prompt at a time, and if another prompt is shown then this method will block for up to timeout_seconds seconds. If timeout_seconds is equal to -1, then this will block indefinitely until the prompt can be opened. If timeout_seconds expires, then this function will fail with a %GCR_SYSTEM_PROMPT_IN_PROGRESS error.

    Parameters

    • timeoutSeconds: number

      the number of seconds to wait to access the prompt, or -1

    • cancellable: Gio.Cancellable

      optional cancellation object

    Returns SystemPrompt

  • Asynchronously open a system prompt with the default system prompter.

    Most system prompters only allow showing one prompt at a time, and if another prompt is shown then this method will block for up to timeout_seconds seconds. If timeout_seconds is equal to -1, then this will block indefinitely until the prompt can be opened. If timeout_seconds expires, then this operation will fail with a %GCR_SYSTEM_PROMPT_IN_PROGRESS error.

    Parameters

    • timeoutSeconds: number

      the number of seconds to wait to access the prompt, or -1

    • cancellable: Gio.Cancellable

      optional cancellation object

    • callback: AsyncReadyCallback

      called when the operation completes

    Returns void

  • Opens a system prompt. If prompter_name is %NULL, then the default system prompter is used.

    Most system prompters only allow showing one prompt at a time, and if another prompt is shown then this method will block for up to timeout_seconds seconds. If timeout_seconds is equal to -1, then this will block indefinitely until the prompt can be opened. If timeout_seconds expires, then this function will fail with a %GCR_SYSTEM_PROMPT_IN_PROGRESS error.

    Parameters

    • prompterName: string

      the prompter dbus name

    • timeoutSeconds: number

      the number of seconds to wait to access the prompt, or -1

    • cancellable: Gio.Cancellable

      optional cancellation object

    Returns SystemPrompt

  • Opens a system prompt asynchronously. If prompter_name is %NULL, then the default system prompter is used.

    Most system prompters only allow showing one prompt at a time, and if another prompt is shown then this method will block for up to timeout_seconds seconds. If timeout_seconds is equal to -1, then this will block indefinitely until the prompt can be opened. If timeout_seconds expires, then this operation will fail with a %GCR_SYSTEM_PROMPT_IN_PROGRESS error.

    Parameters

    • prompterName: string

      the prompter D-Bus name

    • timeoutSeconds: number

      the number of seconds to wait to access the prompt, or -1

    • cancellable: Gio.Cancellable

      optional cancellation object

    • callback: AsyncReadyCallback

      called when the operation completes

    Returns void

Legend

  • Module
  • Object literal
  • Variable
  • Function
  • Function with type parameter
  • Index signature
  • Type alias
  • Type alias with type parameter
  • Enumeration
  • Enumeration member
  • Property
  • Method
  • Interface
  • Interface with type parameter
  • Constructor
  • Property
  • Method
  • Index signature
  • Class
  • Class with type parameter
  • Constructor
  • Property
  • Method
  • Accessor
  • Index signature
  • Inherited constructor
  • Inherited property
  • Inherited method
  • Inherited accessor
  • Protected property
  • Protected method
  • Protected accessor
  • Private property
  • Private method
  • Private accessor
  • Static property
  • Static method