Create a new #GUPnPRootDevice object, automatically loading and parsing
device description document from description_path.
The #GUPnPContext
Path to device description document. This could either be an absolute path or path relative to description_dir.
Path to directory where description documents are provided.
TRUE if this device is available.
The #GUPnPContext to use.
The path to directory where description documents are provided.
Device description document. Constructor property.
The path to device description document. This could either be an absolute path or path relative to GUPnPRootDevice:description-dir.
The device type.
Private property.
Private property.
The location of the device description file.
The resource factory to use. Set to NULL for default factory.
The containing #GUPnPRootDevice, or NULL if this is the root device.
The UDN of this device.
The URL base (#SoupURI).
Creates a binding between source_property on source and target_property
on target.
Whenever the source_property is changed the target_property is
updated using the same value. For instance:
g_object_bind_property (action, "active", widget, "sensitive", 0);
Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.
If flags contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual:
if target_property on target changes then the source_property on source
will be updated as well.
The binding will automatically be removed when either the source or the
target instances are finalized. To remove the binding without affecting the
source and the target you can just call g_object_unref() on the returned
#GBinding instance.
Removing the binding by calling g_object_unref() on it must only be done if
the binding, source and target are only used from a single thread and it
is clear that both source and target outlive the binding. Especially it
is not safe to rely on this if the binding, source or target can be
finalized from different threads. Keep another reference to the binding and
use g_binding_unbind() instead to be on the safe side.
A #GObject can have multiple bindings.
the property on source to bind
the target #GObject
the property on target to bind
flags to pass to #GBinding
Creates a binding between source_property on source and target_property
on target, allowing you to set the transformation functions to be used by
the binding.
This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.
the property on source to bind
the target #GObject
the property on target to bind
flags to pass to #GBinding
a #GClosure wrapping the transformation function from the source to the target, or %NULL to use the default
a #GClosure wrapping the transformation function from the target to the source, or %NULL to use the default
This function is intended for #GObject implementations to re-enforce a [floating][floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink().
Increases the freeze count on object. If the freeze count is
non-zero, the emission of "notify" signals on object is
stopped. The signals are queued until the freeze count is decreased
to zero. Duplicate notifications are squashed so that at most one
#GObject::notify signal is emitted for each property modified while the
object is frozen.
This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Get whether or not root_device is available (announcing its presence).
Gets a named field from the objects table of associations (see g_object_set_data()).
name of the key for that association
Get the path to the directory containing description documents related to
root_device.
Get the path to the device description document of root_device.
This function provides generic access to the contents of arbitrary elements in the device description file.
Name of the description element to retrieve
Get the service with type type directly contained in info as
a new object implementing #GUPnPDeviceInfo, or %NULL if no such device
was found. The returned object should be unreffed when done.
Note that devices are not cached internally, so that every time you call this function a new object is created. The application must cache any used devices if it wishes to keep them around and re-use them.
The type of the device to be retrieved.
Get the UPnP device type.
Get the friendly name of the device.
Get a URL pointing to the icon most closely matching the
given criteria, or %NULL. If requested_mime_type is set, only icons with
this mime type will be returned. If requested_depth is set, only icons with
this or lower depth will be returned. If requested_width and/or
requested_height are set, only icons that are this size or smaller are
returned, unless prefer_bigger is set, in which case the next biggest icon
will be returned. The returned strings should be freed.
The requested file format, or %NULL for any
The requested color depth, or -1 for any
The requested width, or -1 for any
The requested height, or -1 for any
%TRUE if a bigger, rather than a smaller icon should be returned if no exact match could be found
Get the location of the device description file.
Get the manufacturer of the device.
Get a URL pointing to the manufacturer's website.
Get the description of the device model.
Get the model name of the device.
Get the model number of the device.
Get a URL pointing to the device model's website.
Get a URL pointing to the device's presentation page, for web-based administration.
Gets a property of an object.
The value can be:
In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().
Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.
the name of the property to get
return location for the property value
This function gets back user data pointers stored via g_object_set_qdata().
A #GQuark, naming the user data pointer
Get the relative location of root_device.
Get the #GUPnPResourceFactory used by the device_info.
Get the serial number of the device.
Get the service with type type directly contained in info as a new object
implementing #GUPnPServiceInfo, or %NULL if no such device was found. The
returned object should be unreffed when done.
Note that services are not cached internally, so that every time you call this function a new object is created. The application must cache any used services if it wishes to keep them around and re-use them.
The type of the service to be retrieved.
Get the #GSSDPResourceGroup used by root_device.
Get the Unique Device Name of the device.
Get the Universal Product Code of the device.
Gets n_properties properties for an object.
Obtained properties will be set to values. All properties must be valid.
Warnings will be emitted and undefined behaviour may result if invalid
properties are passed in.
the names of each property to get
the values of each property to get
Checks whether object has a [floating][floating-ref] reference.
Get a #GList of strings representing the types of the devices
directly contained in info.
Get a #GList of new objects implementing #GUPnPDeviceInfo
representing the devices directly contained in info. The returned list
should be g_list_free()'d and the elements should be g_object_unref()'d.
Note that devices are not cached internally, so that every time you call this function new objects are created. The application must cache any used devices if it wishes to keep them around and re-use them.
Get a #GList of strings that represent the device capabilities as announced in the device description file using the <dlna:X_DLNACAP> element.
Get a #GList of strings that represent the device class and version as announced in the device description file using the <dlna:X_DLNADOC> element.
Get a #GList of strings representing the types of the services
directly contained in info.
Get a #GList of new objects implementing #GUPnPServiceInfo representing the
services directly contained in info. The returned list should be
g_list_free()'d and the elements should be g_object_unref()'d.
Note that services are not cached internally, so that every time you call function new objects are created. The application must cache any used services if it wishes to keep them around and re-use them.
Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.
the name of a property installed on the class of object.
Emits a "notify" signal for the property specified by pspec on object.
This function omits the property name lookup, hence it is faster than g_object_notify().
One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:
enum
{
PROP_0,
PROP_FOO,
PROP_LAST
};
static GParamSpec *properties[PROP_LAST];
static void
my_object_class_init (MyObjectClass *klass)
{
properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
0, 100,
50,
G_PARAM_READWRITE);
g_object_class_install_property (gobject_class,
PROP_FOO,
properties[PROP_FOO]);
}
and then notify a change on the "foo" property with:
g_object_notify_by_pspec (self, properties[PROP_FOO]);
the #GParamSpec of a property installed on the class of object.
Increase the reference count of object, and possibly remove the
[floating][floating-ref] reference, if object has a floating reference.
In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.
Since GLib 2.56, the type of object will be propagated to the return type
under the same conditions as for g_object_ref().
Releases all references to other objects. This can be used to break reference cycles.
This function should only be called from object system implementations.
Controls whether or not root_device is available (announcing
its presence).
%TRUE if root_device should be available
Each object carries around a table of associations from strings to pointers. This function lets you set an association.
If the object already had an association with that name, the old association will be destroyed.
Internally, the key is converted to a #GQuark using g_quark_from_string().
This means a copy of key is kept permanently (even after object has been
finalized) — so it is recommended to only use a small, bounded set of values
for key in your program, to avoid the #GQuark storage growing unbounded.
name of the key
data to associate with that key
Sets a property on an object.
the name of the property to set
the value
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
name of the key
This function gets back user data pointers stored via
g_object_set_qdata() and removes the data from object
without invoking its destroy() function (if any was
set).
Usually, calling this function is only required to update
user data pointers with a destroy notifier, for example:
void
object_add_to_user_list (GObject *object,
const gchar *new_string)
{
// the quark, naming the object data
GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
// retrieve the old string list
GList *list = g_object_steal_qdata (object, quark_string_list);
// prepend new string
list = g_list_prepend (list, g_strdup (new_string));
// this changed 'list', so we need to set it again
g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
GList *node, *list = data;
for (node = list; node; node = node->next)
g_free (node->data);
g_list_free (list);
}
Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().
A #GQuark, naming the user data pointer
Reverts the effect of a previous call to
g_object_freeze_notify(). The freeze count is decreased on object
and when it reaches zero, queued "notify" signals are emitted.
Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.
It is an error to call this function when the freeze count is zero.
Decreases the reference count of object. When its reference count
drops to 0, the object is finalized (i.e. its memory is freed).
If the pointer to the #GObject may be reused in future (for example, if it is an instance variable of another object), it is recommended to clear the pointer to %NULL rather than retain a dangling pointer to a potentially invalid #GObject instance. Use g_clear_object() for this.
This function essentially limits the life time of the closure to
the life time of the object. That is, when the object is finalized,
the closure is invalidated by calling g_closure_invalidate() on
it, in order to prevent invocations of the closure with a finalized
(nonexisting) object. Also, g_object_ref() and g_object_unref() are
added as marshal guards to the closure, to ensure that an extra
reference count is held on object during invocation of the
closure. Usually, this function will be called on closures that
use this object as closure data.
#GClosure to watch
Find the #GParamSpec with the given name for an
interface. Generally, the interface vtable passed in as g_iface
will be the default vtable from g_type_default_interface_ref(), or,
if you know the interface has already been loaded,
g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
name of a property to look up.
Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created #GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.
This function is meant to be called from the interface's default
vtable initialization function (the class_init member of
#GTypeInfo.) It must not be called after after class_init has
been called for any object types implementing this interface.
If pspec is a floating reference, it will be consumed.
any interface vtable for the interface, or the default vtable for the interface.
the #GParamSpec for the new property
Lists the properties of an interface.Generally, the interface
vtable passed in as g_iface will be the default vtable from
g_type_default_interface_ref(), or, if you know the interface has
already been loaded, g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
Create a new #GUPnPRootDevice object, automatically loading and parsing
device description document from description_path.
The #GUPnPContext
Path to device description document. This could either be an absolute path or path relative to description_dir.
Path to directory where description documents are provided.
Create a new #GUPnPRootDevice, automatically loading and parsing
device description document from description_path if description_doc is
%NULL.
A #GUPnPContext
A #GUPnPResourceFactory
Device description document, or %NULL
Path to device description document. This could either be an absolute path or path relative to description_dir.
Path to directory where description documents are provided.
Creates a new instance of a #GObject subtype and sets its properties.
Construction parameters (see %G_PARAM_CONSTRUCT, %G_PARAM_CONSTRUCT_ONLY) which are not explicitly specified are set to their default values.
the type id of the #GObject subtype to instantiate
an array of #GParameter
This struct contains private data only, and should be accessed using the functions below.