Gjsify LogoGjsify Logo

Contains only private data that should be read and manipulated using the functions below. Implements #GNetworkMonitorInterface.

Hierarchy

Index

Constructors

Properties

connectivity: NetworkConnectivity

More detailed information about the host's network connectivity. See g_network_monitor_get_connectivity() and #GNetworkConnectivity for more details.

gTypeInstance: TypeInstance
gioName: string

The GIO name of the underlying #GNetworkMonitor to use.

networkAvailable: boolean

Whether the network is considered available. That is, whether the system has a default route for at least one of IPv4 or IPv6.

Real-world networks are of course much more complicated than this; the machine may be connected to a wifi hotspot that requires payment before allowing traffic through, or may be connected to a functioning router that has lost its own upstream connectivity. Some hosts might only be accessible when a VPN is active. Other hosts might only be accessible when the VPN is not active. Thus, it is best to use g_network_monitor_can_reach() or g_network_monitor_can_reach_async() to test for reachability on a host-by-host basis. (On the other hand, when the property is %FALSE, the application can reasonably expect that no remote hosts at all are reachable, and should indicate this to the user in its UI.)

See also #GNetworkMonitor::network-changed.

networkMetered: boolean

Whether the network is considered metered. That is, whether the system has traffic flowing through the default connection that is subject to limitations set by service providers. For example, traffic might be billed by the amount of data transmitted, or there might be a quota on the amount of traffic per month. This is typical with tethered connections (3G and 4G) and in such situations, bandwidth intensive applications may wish to avoid network activity where possible if it will cost the user money or use up their limited quota.

If more information is required about specific devices then the system network management API should be used instead (for example, NetworkManager or ConnMan).

If this information is not available then no networks will be marked as metered.

See also #GNetworkMonitor:network-available.

name: string

Methods

  • Creates a binding between source_property on source and target_property on target.

    Whenever the source_property is changed the target_property is updated using the same value. For instance:

      g_object_bind_property (action, "active", widget, "sensitive", 0);
    

    Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.

    If flags contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual: if target_property on target changes then the source_property on source will be updated as well.

    The binding will automatically be removed when either the source or the target instances are finalized. To remove the binding without affecting the source and the target you can just call g_object_unref() on the returned #GBinding instance.

    Removing the binding by calling g_object_unref() on it must only be done if the binding, source and target are only used from a single thread and it is clear that both source and target outlive the binding. Especially it is not safe to rely on this if the binding, source or target can be finalized from different threads. Keep another reference to the binding and use g_binding_unbind() instead to be on the safe side.

    A #GObject can have multiple bindings.

    Parameters

    • sourceProperty: string

      the property on source to bind

    • target: GObject.Object

      the target #GObject

    • targetProperty: string

      the property on target to bind

    • flags: BindingFlags

      flags to pass to #GBinding

    Returns Binding

  • Creates a binding between source_property on source and target_property on target, allowing you to set the transformation functions to be used by the binding.

    This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.

    Parameters

    • sourceProperty: string

      the property on source to bind

    • target: GObject.Object

      the target #GObject

    • targetProperty: string

      the property on target to bind

    • flags: BindingFlags

      flags to pass to #GBinding

    • transformTo: TClosure<any, any>

      a #GClosure wrapping the transformation function from the source to the target, or %NULL to use the default

    • transformFrom: TClosure<any, any>

      a #GClosure wrapping the transformation function from the target to the source, or %NULL to use the default

    Returns Binding

  • Attempts to determine whether or not the host pointed to by connectable can be reached, without actually trying to connect to it.

    This may return %TRUE even when #GNetworkMonitor:network-available is %FALSE, if, for example, monitor can determine that connectable refers to a host on a local network.

    If monitor believes that an attempt to connect to connectable will succeed, it will return %TRUE. Otherwise, it will return %FALSE and set error to an appropriate error (such as %G_IO_ERROR_HOST_UNREACHABLE).

    Note that although this does not attempt to connect to connectable, it may still block for a brief period of time (eg, trying to do multicast DNS on the local network), so if you do not want to block, you should use g_network_monitor_can_reach_async().

    Parameters

    Returns boolean

  • Asynchronously attempts to determine whether or not the host pointed to by connectable can be reached, without actually trying to connect to it.

    For more details, see g_network_monitor_can_reach().

    When the operation is finished, callback will be called. You can then call g_network_monitor_can_reach_finish() to get the result of the operation.

    Parameters

    Returns void

  • connect(sigName: "notify::gio-name", callback: ((...args: any[]) => void)): number
  • connect(sigName: "notify::connectivity", callback: ((...args: any[]) => void)): number
  • connect(sigName: "notify::network-available", callback: ((...args: any[]) => void)): number
  • connect(sigName: "notify::network-metered", callback: ((...args: any[]) => void)): number
  • connect(sigName: string, callback: ((...args: any[]) => void)): number
  • Parameters

    • sigName: "notify::gio-name"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns number

  • Parameters

    • sigName: "notify::connectivity"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns number

  • Parameters

    • sigName: "notify::network-available"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns number

  • Parameters

    • sigName: "notify::network-metered"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns number

  • Parameters

    • sigName: string
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns number

  • dupGioName(): string
  • Get currently set GIO name for the network availability checks. See e_network_monitor_set_gio_name() for more details.

    Returns string

  • emit(sigName: "notify::gio-name", ...args: any[]): void
  • emit(sigName: "notify::connectivity", ...args: any[]): void
  • emit(sigName: "notify::network-available", ...args: any[]): void
  • emit(sigName: "notify::network-metered", ...args: any[]): void
  • emit(sigName: string, ...args: any[]): void
  • forceFloating(): void
  • This function is intended for #GObject implementations to re-enforce a [floating][floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink().

    Returns void

  • freezeNotify(): void
  • Increases the freeze count on object. If the freeze count is non-zero, the emission of "notify" signals on object is stopped. The signals are queued until the freeze count is decreased to zero. Duplicate notifications are squashed so that at most one #GObject::notify signal is emitted for each property modified while the object is frozen.

    This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.

    Returns void

  • Gets a more detailed networking state than g_network_monitor_get_network_available().

    If #GNetworkMonitor:network-available is %FALSE, then the connectivity state will be %G_NETWORK_CONNECTIVITY_LOCAL.

    If #GNetworkMonitor:network-available is %TRUE, then the connectivity state will be %G_NETWORK_CONNECTIVITY_FULL (if there is full Internet connectivity), %G_NETWORK_CONNECTIVITY_LIMITED (if the host has a default route, but appears to be unable to actually reach the full Internet), or %G_NETWORK_CONNECTIVITY_PORTAL (if the host is trapped behind a "captive portal" that requires some sort of login or acknowledgement before allowing full Internet access).

    Note that in the case of %G_NETWORK_CONNECTIVITY_LIMITED and %G_NETWORK_CONNECTIVITY_PORTAL, it is possible that some sites are reachable but others are not. In this case, applications can attempt to connect to remote servers, but should gracefully fall back to their "offline" behavior if the connection attempt fails.

    Returns NetworkConnectivity

  • getData(key?: string): object
  • Gets a named field from the objects table of associations (see g_object_set_data()).

    Parameters

    • Optional key: string

      name of the key for that association

    Returns object

  • getNetworkAvailable(): boolean
  • Checks if the network is available. "Available" here means that the system has a default route available for at least one of IPv4 or IPv6. It does not necessarily imply that the public Internet is reachable. See #GNetworkMonitor:network-available for more details.

    Returns boolean

  • getNetworkMetered(): boolean
  • getProperty(propertyName?: string, value?: any): void
  • Gets a property of an object.

    The value can be:

    • an empty #GValue initialized by %G_VALUE_INIT, which will be automatically initialized with the expected type of the property (since GLib 2.60)
    • a #GValue initialized with the expected type of the property
    • a #GValue initialized with a type to which the expected type of the property can be transformed

    In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().

    Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.

    Parameters

    • Optional propertyName: string

      the name of the property to get

    • Optional value: any

      return location for the property value

    Returns void

  • getQdata(quark: number): object
  • This function gets back user data pointers stored via g_object_set_qdata().

    Parameters

    • quark: number

      A #GQuark, naming the user data pointer

    Returns object

  • getv(names: string[], values: any[]): void
  • Gets n_properties properties for an object. Obtained properties will be set to values. All properties must be valid. Warnings will be emitted and undefined behaviour may result if invalid properties are passed in.

    Parameters

    • names: string[]

      the names of each property to get

    • values: any[]

      the values of each property to get

    Returns void

  • Initializes the object implementing the interface.

    This method is intended for language bindings. If writing in C, g_initable_new() should typically be used instead.

    The object must be initialized before any real use after initial construction, either with this function or g_async_initable_init_async().

    Implementations may also support cancellation. If cancellable is not %NULL, then initialization can be cancelled by triggering the cancellable object from another thread. If the operation was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If cancellable is not %NULL and the object doesn't support cancellable initialization the error %G_IO_ERROR_NOT_SUPPORTED will be returned.

    If the object is not initialized, or initialization returns with an error, then all operations on the object except g_object_ref() and g_object_unref() are considered to be invalid, and have undefined behaviour. See the [introduction][ginitable] for more details.

    Callers should not assume that a class which implements #GInitable can be initialized multiple times, unless the class explicitly documents itself as supporting this. Generally, a class’ implementation of init() can assume (and assert) that it will only be called once. Previously, this documentation recommended all #GInitable implementations should be idempotent; that recommendation was relaxed in GLib 2.54.

    If a class explicitly supports being initialized multiple times, it is recommended that the method is idempotent: multiple calls with the same arguments should return the same results. Only the first call initializes the object; further calls return the result of the first call.

    One reason why a class might need to support idempotent initialization is if it is designed to be used via the singleton pattern, with a #GObjectClass.constructor that sometimes returns an existing instance. In this pattern, a caller would expect to be able to call g_initable_init() on the result of g_object_new(), regardless of whether it is in fact a new instance.

    Parameters

    • Optional cancellable: Gio.Cancellable

      optional #GCancellable object, %NULL to ignore.

    Returns boolean

  • isFloating(): boolean
  • listGioNames(): string[]
  • Get a list of available GIO names for the #GNetworkMonitor implementations. The strings can be used in e_network_monitor_set_gio_name().

    Returns string[]

  • notify(propertyName: string): void
  • Emits a "notify" signal for the property property_name on object.

    When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.

    Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.

    Parameters

    • propertyName: string

      the name of a property installed on the class of object.

    Returns void

  • Emits a "notify" signal for the property specified by pspec on object.

    This function omits the property name lookup, hence it is faster than g_object_notify().

    One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:

      enum
    {
    PROP_0,
    PROP_FOO,
    PROP_LAST
    };

    static GParamSpec *properties[PROP_LAST];

    static void
    my_object_class_init (MyObjectClass *klass)
    {
    properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
    0, 100,
    50,
    G_PARAM_READWRITE);
    g_object_class_install_property (gobject_class,
    PROP_FOO,
    properties[PROP_FOO]);
    }

    and then notify a change on the "foo" property with:

      g_object_notify_by_pspec (self, properties[PROP_FOO]);
    

    Parameters

    • pspec: ParamSpec

      the #GParamSpec of a property installed on the class of object.

    Returns void

  • off(sigName: "notify::gio-name", callback: ((...args: any[]) => void)): EventEmitter
  • off(sigName: "notify::connectivity", callback: ((...args: any[]) => void)): EventEmitter
  • off(sigName: "notify::network-available", callback: ((...args: any[]) => void)): EventEmitter
  • off(sigName: "notify::network-metered", callback: ((...args: any[]) => void)): EventEmitter
  • off(sigName: string, callback: ((...args: any[]) => void)): EventEmitter
  • Parameters

    • sigName: "notify::gio-name"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns EventEmitter

  • Parameters

    • sigName: "notify::connectivity"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns EventEmitter

  • Parameters

    • sigName: "notify::network-available"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns EventEmitter

  • Parameters

    • sigName: "notify::network-metered"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns EventEmitter

  • Parameters

    • sigName: string
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    Returns EventEmitter

  • on(sigName: "notify::gio-name", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • on(sigName: "notify::connectivity", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • on(sigName: "notify::network-available", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • on(sigName: "notify::network-metered", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • on(sigName: string, callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • Parameters

    • sigName: "notify::gio-name"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::connectivity"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::network-available"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::network-metered"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: string
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • once(sigName: "notify::gio-name", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • once(sigName: "notify::connectivity", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • once(sigName: "notify::network-available", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • once(sigName: "notify::network-metered", callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • once(sigName: string, callback: ((...args: any[]) => void), after?: boolean): EventEmitter
  • Parameters

    • sigName: "notify::gio-name"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::connectivity"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::network-available"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: "notify::network-metered"
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Parameters

    • sigName: string
    • callback: ((...args: any[]) => void)
        • (...args: any[]): void
        • Parameters

          • Rest ...args: any[]

          Returns void

    • Optional after: boolean

    Returns EventEmitter

  • Increases the reference count of object.

    Since GLib 2.56, if GLIB_VERSION_MAX_ALLOWED is 2.56 or greater, the type of object will be propagated to the return type (using the GCC typeof() extension), so any casting the caller needs to do on the return type must be explicit.

    Returns GObject.Object

  • Increase the reference count of object, and possibly remove the [floating][floating-ref] reference, if object has a floating reference.

    In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.

    Since GLib 2.56, the type of object will be propagated to the return type under the same conditions as for g_object_ref().

    Returns GObject.Object

  • runDispose(): void
  • Releases all references to other objects. This can be used to break reference cycles.

    This function should only be called from object system implementations.

    Returns void

  • setData(key: string, data?: object): void
  • Each object carries around a table of associations from strings to pointers. This function lets you set an association.

    If the object already had an association with that name, the old association will be destroyed.

    Internally, the key is converted to a #GQuark using g_quark_from_string(). This means a copy of key is kept permanently (even after object has been finalized) — so it is recommended to only use a small, bounded set of values for key in your program, to avoid the #GQuark storage growing unbounded.

    Parameters

    • key: string

      name of the key

    • Optional data: object

      data to associate with that key

    Returns void

  • setGioName(gioName: string): void
  • Set a gio_name of the #GNetworkMonitor implementation to use, can be %NULL. Use e_network_monitor_list_gio_names() for a list of available implementations. A special value, %E_NETWORK_MONITOR_ALWAYS_ONLINE_NAME, can be used to report the network as always reachable. When an unknown GIO name is used the default #GNetworkMonitor implementation, as returned by the g_network_monitor_get_default(), will be used.

    Parameters

    • gioName: string

      a GIO name of a #GNetworkMonitor implementation to use, or %NULL

    Returns void

  • setProperty(propertyName: string, value?: any): void
  • Sets a property on an object.

    Parameters

    • propertyName: string

      the name of the property to set

    • Optional value: any

      the value

    Returns void

  • stealData(key?: string): object
  • Remove a specified datum from the object's data associations, without invoking the association's destroy handler.

    Parameters

    • Optional key: string

      name of the key

    Returns object

  • stealQdata(quark: number): object
  • This function gets back user data pointers stored via g_object_set_qdata() and removes the data from object without invoking its destroy() function (if any was set). Usually, calling this function is only required to update user data pointers with a destroy notifier, for example:

    void
    object_add_to_user_list (GObject *object,
    const gchar *new_string)
    {
    // the quark, naming the object data
    GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
    // retrieve the old string list
    GList *list = g_object_steal_qdata (object, quark_string_list);

    // prepend new string
    list = g_list_prepend (list, g_strdup (new_string));
    // this changed 'list', so we need to set it again
    g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
    }
    static void
    free_string_list (gpointer data)
    {
    GList *node, *list = data;

    for (node = list; node; node = node->next)
    g_free (node->data);
    g_list_free (list);
    }

    Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().

    Parameters

    • quark: number

      A #GQuark, naming the user data pointer

    Returns object

  • thawNotify(): void
  • Reverts the effect of a previous call to g_object_freeze_notify(). The freeze count is decreased on object and when it reaches zero, queued "notify" signals are emitted.

    Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.

    It is an error to call this function when the freeze count is zero.

    Returns void

  • unref(): void
  • Decreases the reference count of object. When its reference count drops to 0, the object is finalized (i.e. its memory is freed).

    If the pointer to the #GObject may be reused in future (for example, if it is an instance variable of another object), it is recommended to clear the pointer to %NULL rather than retain a dangling pointer to a potentially invalid #GObject instance. Use g_clear_object() for this.

    Returns void

  • watchClosure(closure: TClosure<any, any>): void
  • This function essentially limits the life time of the closure to the life time of the object. That is, when the object is finalized, the closure is invalidated by calling g_closure_invalidate() on it, in order to prevent invocations of the closure with a finalized (nonexisting) object. Also, g_object_ref() and g_object_unref() are added as marshal guards to the closure, to ensure that an extra reference count is held on object during invocation of the closure. Usually, this function will be called on closures that use this object as closure data.

    Parameters

    • closure: TClosure<any, any>

      #GClosure to watch

    Returns void

  • compatControl(what: number, data: object): number
  • Find the #GParamSpec with the given name for an interface. Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek().

    Parameters

    • gIface: TypeInterface

      any interface vtable for the interface, or the default vtable for the interface

    • propertyName: string

      name of a property to look up.

    Returns ParamSpec

  • Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created #GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.

    This function is meant to be called from the interface's default vtable initialization function (the class_init member of #GTypeInfo.) It must not be called after after class_init has been called for any object types implementing this interface.

    If pspec is a floating reference, it will be consumed.

    Parameters

    • gIface: TypeInterface

      any interface vtable for the interface, or the default vtable for the interface.

    • pspec: ParamSpec

      the #GParamSpec for the new property

    Returns void

  • Lists the properties of an interface.Generally, the interface vtable passed in as g_iface will be the default vtable from g_type_default_interface_ref(), or, if you know the interface has already been loaded, g_type_default_interface_peek().

    Parameters

    • gIface: TypeInterface

      any interface vtable for the interface, or the default vtable for the interface

    Returns ParamSpec[]

  • Creates a new instance of a #GObject subtype and sets its properties.

    Construction parameters (see %G_PARAM_CONSTRUCT, %G_PARAM_CONSTRUCT_ONLY) which are not explicitly specified are set to their default values.

    Parameters

    • objectType: GType<unknown>

      the type id of the #GObject subtype to instantiate

    • parameters: GObject.Parameter[]

      an array of #GParameter

    Returns GObject.Object

Legend

  • Module
  • Object literal
  • Variable
  • Function
  • Function with type parameter
  • Index signature
  • Type alias
  • Type alias with type parameter
  • Enumeration
  • Enumeration member
  • Property
  • Method
  • Interface
  • Interface with type parameter
  • Constructor
  • Property
  • Method
  • Index signature
  • Class
  • Class with type parameter
  • Constructor
  • Property
  • Method
  • Accessor
  • Index signature
  • Inherited constructor
  • Inherited property
  • Inherited method
  • Inherited accessor
  • Protected property
  • Protected method
  • Protected accessor
  • Private property
  • Private method
  • Private accessor
  • Static property
  • Static method