Creates a new #ClutterFlowLayout with the given orientation
the orientation of the flow layout
The spacing between columns, in pixels; the value of this property is honoured by horizontal non-overflowing layouts and by vertical overflowing layouts
Whether each child inside the #ClutterFlowLayout should receive the same allocation
Maximum width for each column in the layout, in pixels. If set to -1 the width will be the maximum child width
Maximum height for each row in the layout, in pixels. If set to -1 the width will be the maximum child height
Minimum width for each column in the layout, in pixels
Minimum height for each row in the layout, in pixels
The orientation of the #ClutterFlowLayout. The children of the layout will be layed out following the orientation.
This property also controls the overflowing directions
The spacing between rows, in pixels; the value of this property is honoured by vertical non-overflowing layouts and by horizontal overflowing layouts
Whether the #ClutterFlowLayout should arrange its children on a grid
Allocates the children of container given an area
See also clutter_actor_allocate()
the #ClutterContainer using manager
the #ClutterActorBox containing the allocated area of container
the allocation flags
Begins an animation of duration milliseconds, using the provided
easing mode
The easing mode can be specified either as a #ClutterAnimationMode or as a logical id returned by clutter_alpha_register_func()
The result of this function depends on the manager implementation
the duration of the animation, in milliseconds
the easing mode of the animation
Creates a binding between source_property on source and target_property
on target.
Whenever the source_property is changed the target_property is
updated using the same value. For instance:
g_object_bind_property (action, "active", widget, "sensitive", 0);
Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.
If flags contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual:
if target_property on target changes then the source_property on source
will be updated as well.
The binding will automatically be removed when either the source or the
target instances are finalized. To remove the binding without affecting the
source and the target you can just call g_object_unref() on the returned
#GBinding instance.
Removing the binding by calling g_object_unref() on it must only be done if
the binding, source and target are only used from a single thread and it
is clear that both source and target outlive the binding. Especially it
is not safe to rely on this if the binding, source or target can be
finalized from different threads. Keep another reference to the binding and
use g_binding_unbind() instead to be on the safe side.
A #GObject can have multiple bindings.
the property on source to bind
the target #GObject
the property on target to bind
flags to pass to #GBinding
Creates a binding between source_property on source and target_property
on target, allowing you to set the transformation functions to be used by
the binding.
This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.
the property on source to bind
the target #GObject
the property on target to bind
flags to pass to #GBinding
a #GClosure wrapping the transformation function from the source to the target, or %NULL to use the default
a #GClosure wrapping the transformation function from the target to the source, or %NULL to use the default
Gets a property on the #ClutterLayoutMeta created by manager and
attached to a child of container
The #GValue must already be initialized to the type of the property and has to be unset with g_value_unset() after extracting the real value out of it
a #ClutterContainer using manager
a #ClutterActor child of container
the name of the property to get
a #GValue with the value of the property to get
Sets a property on the #ClutterLayoutMeta created by manager and
attached to a child of container
a #ClutterContainer using manager
a #ClutterActor child of container
the name of the property to set
a #GValue with the value of the property to set
Ends an animation started by clutter_layout_manager_begin_animation()
The result of this call depends on the manager implementation
Retrieves the #GParamSpec for the layout property name inside
the #ClutterLayoutMeta sub-class used by manager
the name of the property
This function is intended for #GObject implementations to re-enforce a [floating][floating-ref] object reference. Doing this is seldom required: all #GInitiallyUnowneds are created with a floating reference which usually just needs to be sunken by calling g_object_ref_sink().
Increases the freeze count on object. If the freeze count is
non-zero, the emission of "notify" signals on object is
stopped. The signals are queued until the freeze count is decreased
to zero. Duplicate notifications are squashed so that at most one
#GObject::notify signal is emitted for each property modified while the
object is frozen.
This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.
Retrieves the progress of the animation, if one has been started by clutter_layout_manager_begin_animation()
The returned value has the same semantics of the #ClutterAlpha:alpha value
Retrieves the #ClutterLayoutMeta that the layout manager associated
to the actor child of container, eventually by creating one if the
#ClutterLayoutManager supports layout properties
a #ClutterContainer using manager
a #ClutterActor child of container
Retrieves the spacing between columns
Retrieves the minimum and maximum column widths
Gets a named field from the objects table of associations (see g_object_set_data()).
name of the key for that association
Retrieves whether the layout is homogeneous
Retrieves the orientation of the layout
Gets a property of an object.
The value can be:
In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().
Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.
the name of the property to get
return location for the property value
This function gets back user data pointers stored via g_object_set_qdata().
A #GQuark, naming the user data pointer
Retrieves the minimum and maximum row heights
Retrieves the spacing between rows
Retrieves the value of #ClutterFlowLayout:snap-to-grid property
Gets n_properties properties for an object.
Obtained properties will be set to values. All properties must be valid.
Warnings will be emitted and undefined behaviour may result if invalid
properties are passed in.
the names of each property to get
the values of each property to get
Checks whether object has a [floating][floating-ref] reference.
Emits the #ClutterLayoutManager::layout-changed signal on manager
This function should only be called by implementations of the #ClutterLayoutManager class
Retrieves all the #GParamSpecs for the layout properties
stored inside the #ClutterLayoutMeta sub-class used by manager
Emits a "notify" signal for the property property_name on object.
When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.
Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.
the name of a property installed on the class of object.
Emits a "notify" signal for the property specified by pspec on object.
This function omits the property name lookup, hence it is faster than g_object_notify().
One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:
enum
{
PROP_0,
PROP_FOO,
PROP_LAST
};
static GParamSpec *properties[PROP_LAST];
static void
my_object_class_init (MyObjectClass *klass)
{
properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
0, 100,
50,
G_PARAM_READWRITE);
g_object_class_install_property (gobject_class,
PROP_FOO,
properties[PROP_FOO]);
}
and then notify a change on the "foo" property with:
g_object_notify_by_pspec (self, properties[PROP_FOO]);
the #GParamSpec of a property installed on the class of object.
Increase the reference count of object, and possibly remove the
[floating][floating-ref] reference, if object has a floating reference.
In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.
Since GLib 2.56, the type of object will be propagated to the return type
under the same conditions as for g_object_ref().
Releases all references to other objects. This can be used to break reference cycles.
This function should only be called from object system implementations.
Sets the space between columns, in pixels
the space between columns
Sets the minimum and maximum widths that a column can have
minimum width of a column
maximum width of a column
If the #ClutterLayoutManager sub-class allows it, allow
adding a weak reference of the container using manager
from within the layout manager
The layout manager should not increase the reference
count of the container
Each object carries around a table of associations from strings to pointers. This function lets you set an association.
If the object already had an association with that name, the old association will be destroyed.
Internally, the key is converted to a #GQuark using g_quark_from_string().
This means a copy of key is kept permanently (even after object has been
finalized) — so it is recommended to only use a small, bounded set of values
for key in your program, to avoid the #GQuark storage growing unbounded.
name of the key
data to associate with that key
Sets whether the layout should allocate the same space for
each child
whether the layout should be homogeneous or not
Sets the orientation of the flow layout
The orientation controls the direction used to allocate the children: either horizontally or vertically. The orientation also controls the direction of the overflowing
the orientation of the layout
Sets a property on an object.
the name of the property to set
the value
Sets the minimum and maximum heights that a row can have
the minimum height of a row
the maximum height of a row
Sets the spacing between rows, in pixels
the space between rows
Whether the layout should place its children on a grid.
%TRUE if layout should place its children on a grid
Remove a specified datum from the object's data associations, without invoking the association's destroy handler.
name of the key
This function gets back user data pointers stored via
g_object_set_qdata() and removes the data from object
without invoking its destroy() function (if any was
set).
Usually, calling this function is only required to update
user data pointers with a destroy notifier, for example:
void
object_add_to_user_list (GObject *object,
const gchar *new_string)
{
// the quark, naming the object data
GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
// retrieve the old string list
GList *list = g_object_steal_qdata (object, quark_string_list);
// prepend new string
list = g_list_prepend (list, g_strdup (new_string));
// this changed 'list', so we need to set it again
g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
GList *node, *list = data;
for (node = list; node; node = node->next)
g_free (node->data);
g_list_free (list);
}
Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().
A #GQuark, naming the user data pointer
Reverts the effect of a previous call to
g_object_freeze_notify(). The freeze count is decreased on object
and when it reaches zero, queued "notify" signals are emitted.
Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.
It is an error to call this function when the freeze count is zero.
Decreases the reference count of object. When its reference count
drops to 0, the object is finalized (i.e. its memory is freed).
If the pointer to the #GObject may be reused in future (for example, if it is an instance variable of another object), it is recommended to clear the pointer to %NULL rather than retain a dangling pointer to a potentially invalid #GObject instance. Use g_clear_object() for this.
This function essentially limits the life time of the closure to
the life time of the object. That is, when the object is finalized,
the closure is invalidated by calling g_closure_invalidate() on
it, in order to prevent invocations of the closure with a finalized
(nonexisting) object. Also, g_object_ref() and g_object_unref() are
added as marshal guards to the closure, to ensure that an extra
reference count is held on object during invocation of the
closure. Usually, this function will be called on closures that
use this object as closure data.
#GClosure to watch
Find the #GParamSpec with the given name for an
interface. Generally, the interface vtable passed in as g_iface
will be the default vtable from g_type_default_interface_ref(), or,
if you know the interface has already been loaded,
g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
name of a property to look up.
Add a property to an interface; this is only useful for interfaces that are added to GObject-derived types. Adding a property to an interface forces all objects classes with that interface to have a compatible property. The compatible property could be a newly created #GParamSpec, but normally g_object_class_override_property() will be used so that the object class only needs to provide an implementation and inherits the property description, default value, bounds, and so forth from the interface property.
This function is meant to be called from the interface's default
vtable initialization function (the class_init member of
#GTypeInfo.) It must not be called after after class_init has
been called for any object types implementing this interface.
If pspec is a floating reference, it will be consumed.
any interface vtable for the interface, or the default vtable for the interface.
the #GParamSpec for the new property
Lists the properties of an interface.Generally, the interface
vtable passed in as g_iface will be the default vtable from
g_type_default_interface_ref(), or, if you know the interface has
already been loaded, g_type_default_interface_peek().
any interface vtable for the interface, or the default vtable for the interface
Creates a new #ClutterFlowLayout with the given orientation
the orientation of the flow layout
Creates a new instance of a #GObject subtype and sets its properties.
Construction parameters (see %G_PARAM_CONSTRUCT, %G_PARAM_CONSTRUCT_ONLY) which are not explicitly specified are set to their default values.
the type id of the #GObject subtype to instantiate
an array of #GParameter
The #ClutterFlowLayout structure contains only private data and should be accessed using the provided API