Class SeekableInputStream

Whenever the source_property is changed the target_property is updated using the same value. For instance:

  g_object_bind_property (action, "active", widget, "sensitive", 0);

Will result in the "sensitive" property of the widget #GObject instance to be updated with the same value of the "active" property of the action #GObject instance.

If flags contains %G_BINDING_BIDIRECTIONAL then the binding will be mutual: if target_property on target changes then the source_property on source will be updated as well.

The binding will automatically be removed when either the source or the target instances are finalized. To remove the binding without affecting the source and the target you can just call g_object_unref() on the returned #GBinding instance.

Removing the binding by calling g_object_unref() on it must only be done if the binding, source and target are only used from a single thread and it is clear that both source and target outlive the binding. Especially it is not safe to rely on this if the binding, source or target can be finalized from different threads. Keep another reference to the binding and use g_binding_unbind() instead to be on the safe side.

A #GObject can have multiple bindings.

This function is the language bindings friendly version of g_object_bind_property_full(), using #GClosures instead of function pointers.

For behaviour details see g_input_stream_close().

The asynchronous methods have a default fallback that uses threads to implement asynchronicity, so they are optional for inheriting classes. However, if you override one you must override all.

This is necessary for accessors that modify multiple properties to prevent premature notification while the object is still being modified.

The value can be:

• an empty #GValue initialized by %G_VALUE_INIT, which will be automatically initialized with the expected type of the property (since GLib 2.60)
• a #GValue initialized with the expected type of the property
• a #GValue initialized with a type to which the expected type of the property can be transformed

In general, a copy is made of the property contents and the caller is responsible for freeing the memory by calling g_value_unset().

Note that g_object_get_property() is really intended for language bindings, g_object_get() is much more convenient for C programming.

When possible, eg. when signaling a property change from within the class that registered the property, you should use g_object_notify_by_pspec() instead.

Note that emission of the notify signal may be blocked with g_object_freeze_notify(). In this case, the signal emissions are queued and will be emitted (in reverse order) when g_object_thaw_notify() is called.

This function omits the property name lookup, hence it is faster than g_object_notify().

One way to avoid using g_object_notify() from within the class that registered the properties, and using g_object_notify_by_pspec() instead, is to store the GParamSpec used with g_object_class_install_property() inside a static array, e.g.:

  enum
  {
    PROP_0,
    PROP_FOO,
    PROP_LAST
  };

  static GParamSpec *properties[PROP_LAST];

  static void
  my_object_class_init (MyObjectClass *klass)
  {
    properties[PROP_FOO] = g_param_spec_int ("foo", "Foo", "The foo",
                                             0, 100,
                                             50,
                                             G_PARAM_READWRITE);
    g_object_class_install_property (gobject_class,
                                     PROP_FOO,
                                     properties[PROP_FOO]);
  }

and then notify a change on the "foo" property with:

  g_object_notify_by_pspec (self, properties[PROP_FOO]);

This function is similar to g_input_stream_read(), except it tries to read as many bytes as requested, only stopping on an error or end of stream.

On a successful read of count bytes, or if we reached the end of the stream, %TRUE is returned, and bytes_read is set to the number of bytes read into buffer.

If there is an error during the operation %FALSE is returned and error is set to indicate the error status.

As a special exception to the normal conventions for functions that use #GError, if this function returns %FALSE (and sets error) then bytes_read will be set to the number of bytes that were successfully read before the error was encountered. This functionality is only available from C. If you need it from another language then you must write your own loop around g_input_stream_read().

This is the asynchronous equivalent of g_input_stream_read_all().

Call g_input_stream_read_all_finish() to collect the result.

Any outstanding I/O request with higher priority (lower numerical value) will be executed before an outstanding request with lower priority. Default priority is %G_PRIORITY_DEFAULT.

As a special exception to the normal conventions for functions that use #GError, if this function returns %FALSE (and sets error) then bytes_read will be set to the number of bytes that were successfully read before the error was encountered. This functionality is only available from C. If you need it from another language then you must write your own loop around g_input_stream_read_async().

During an async request no other sync and async calls are allowed on stream, and will result in %G_IO_ERROR_PENDING errors.

A value of count larger than %G_MAXSSIZE will cause a %G_IO_ERROR_INVALID_ARGUMENT error.

On success, the number of bytes read into the buffer will be passed to the callback. It is not an error if this is not the same as the requested size, as it can happen e.g. near the end of a file, but generally we try to read as many bytes as requested. Zero is returned on end of file (or if count is zero), but never otherwise.

Any outstanding i/o request with higher priority (lower numerical value) will be executed before an outstanding request with lower priority. Default priority is %G_PRIORITY_DEFAULT.

The asynchronous methods have a default fallback that uses threads to implement asynchronicity, so they are optional for inheriting classes. However, if you override one you must override all.

During an async request no other sync and async calls are allowed on stream, and will result in %G_IO_ERROR_PENDING errors.

A value of count larger than %G_MAXSSIZE will cause a %G_IO_ERROR_INVALID_ARGUMENT error.

On success, the new #GBytes will be passed to the callback. It is not an error if this is smaller than the requested size, as it can happen e.g. near the end of a file, but generally we try to read as many bytes as requested. Zero is returned on end of file (or if count is zero), but never otherwise.

Any outstanding I/O request with higher priority (lower numerical value) will be executed before an outstanding request with lower priority. Default priority is %G_PRIORITY_DEFAULT.

Since GLib 2.56, if GLIB_VERSION_MAX_ALLOWED is 2.56 or greater, the type of object will be propagated to the return type (using the GCC typeof() extension), so any casting the caller needs to do on the return type must be explicit.

In other words, if the object is floating, then this call "assumes ownership" of the floating reference, converting it to a normal reference by clearing the floating flag while leaving the reference count unchanged. If the object is not floating, then this call adds a new normal reference increasing the reference count by one.

Since GLib 2.56, the type of object will be propagated to the return type under the same conditions as for g_object_ref().

This function should only be called from object system implementations.

If the object already had an association with that name, the old association will be destroyed.

Internally, the key is converted to a #GQuark using g_quark_from_string(). This means a copy of key is kept permanently (even after object has been finalized) — so it is recommended to only use a small, bounded set of values for key in your program, to avoid the #GQuark storage growing unbounded.

This is identical to g_input_stream_read(), from a behaviour standpoint, but the bytes that are skipped are not returned to the user. Some streams have an implementation that is more efficient than reading the data.

This function is optional for inherited classes, as the default implementation emulates it using read.

If cancellable is not %NULL, then the operation can be cancelled by triggering the cancellable object from another thread. If the operation was cancelled, the error %G_IO_ERROR_CANCELLED will be returned. If an operation was partially finished when the operation was cancelled the partial result will be returned, without an error.

During an async request no other sync and async calls are allowed, and will result in %G_IO_ERROR_PENDING errors.

A value of count larger than %G_MAXSSIZE will cause a %G_IO_ERROR_INVALID_ARGUMENT error.

On success, the number of bytes skipped will be passed to the callback. It is not an error if this is not the same as the requested size, as it can happen e.g. near the end of a file, but generally we try to skip as many bytes as requested. Zero is returned on end of file (or if count is zero), but never otherwise.

Any outstanding i/o request with higher priority (lower numerical value) will be executed before an outstanding request with lower priority. Default priority is %G_PRIORITY_DEFAULT.

The asynchronous methods have a default fallback that uses threads to implement asynchronicity, so they are optional for inheriting classes. However, if you override one, you must override all.

void
object_add_to_user_list (GObject     *object,
                         const gchar *new_string)
{
  // the quark, naming the object data
  GQuark quark_string_list = g_quark_from_static_string ("my-string-list");
  // retrieve the old string list
  GList *list = g_object_steal_qdata (object, quark_string_list);

  // prepend new string
  list = g_list_prepend (list, g_strdup (new_string));
  // this changed 'list', so we need to set it again
  g_object_set_qdata_full (object, quark_string_list, list, free_string_list);
}
static void
free_string_list (gpointer data)
{
  GList *node, *list = data;

  for (node = list; node; node = node->next)
    g_free (node->data);
  g_list_free (list);
}

Using g_object_get_qdata() in the above example, instead of g_object_steal_qdata() would have left the destroy function set, and thus the partial string list would have been freed upon g_object_set_qdata_full().

Duplicate notifications for each property are squashed so that at most one #GObject::notify signal is emitted for each property, in the reverse order in which they have been queued.

It is an error to call this function when the freeze count is zero.

If the pointer to the #GObject may be reused in future (for example, if it is an instance variable of another object), it is recommended to clear the pointer to %NULL rather than retain a dangling pointer to a potentially invalid #GObject instance. Use g_clear_object() for this.